Mon, 15 Apr 1996 02:00:35 -0400 (EDT)
Release notes for TR Logging Program - Version 5.63
13 March 1996
NOTE: If you are trying to use two Icom radios on the same serial port,
you will not be able to do this. I hope to have this fixed in
the next relase. I have to teach the program how to sort through
the messages and make sure the proper ones are gettng processed
for the correct radio. If you are using two Icom radios, you
will need to use two serial ports.
Version 5.63 - Released on 14 April 1996
- If you were using TRP and the Control-L feature, with big logs, you
might of had some problems after looking at the end of the log. This
is now fixed.
- TRP is no longer distributed with the updates. If you want it, get it
off the BBS or by special request.
- Allow negative input for HOUR OFFSET with Control-J.
- If you have sent a CW message with a Control-B in it, then go into
search and pounce, you might get the first letter of the callsign
twice in the call window. After that, the cursor edit commands are
confused and you may end up with a bunch of garbage in the window.
This has been fixed in this release.
- Some zone overrides in the .CTY file were not working. This is now
- Made the ninth call district in VE count as zone 5 or 9 instead of zero.
- Made Helvetia contest count HB9 as a DX mult if you are in HB9.
- Updated OK/OM contest to new rules (1994 rules).
- Made POST always ask if you want to renumber your log in L C.
Version 5.62 - Released on 8 March 1996
- TRP version now included with updates... uses extended memory.
- Fixed possible hangup when working QSOs that are on packet spot list.
- Fixed problem with mult totals being wrong sometimes if you reload log.
- Fixed summary sheet total mults if over 255.
Version 5.61 on 31 January 1996.
- Fixed DX stations in Sprint coming up with a domestic mult also.
- Made spaces around equal sign not necessary in beam heading file.
- Added showing domestic multiplier status as you enter a domestic QTH
in the exchange window (if it is the first thing there).
- Added QCWA contest (didn't do multipliers however).
- Added MULT REPORT MINIMUM COUNTRIES paramater. This selects the threshold
for the Control-O report which shows countries you have worked on several
bands, but not all bands. This parameter is available in the Control-J
- Added .DOM file for NRAU.
- Made DXMultArray size go to 500 (was 350) for FOC guys. This may be a
temporary feature until I find out a better way to support this contest.
- The program will not ask if the contest is over if editable log is empty.
- Changed title for domestic mults in totals display (Now DomMults).
- Made Remaining Mults and band map update with Alt-R or rig band change.
- Added VERSION display in Control-J (this is read only!).
- Added Branch Zones to legal zone multipliers in LOGCFG.DAT.
Version 5.60 on 16 January 1996.
- Added BAND MAP CALL WINDOW ENABLE (also in Control-J, default = TRUE).
This controls if the callsign and exchange for in the band map will be
put in the call window.
- If a stations call and exchange are in the call window, and you start
typing in a callsign, it will be cleared out and what you type will
be in the window. Also, the band map will not over-write anything in
the call window that you have entered. It will only put information
in there if the call window is empty, or if the information in there
came from the band map.
- Added Alt-G to Control-J. This will write all of the changes you
have made in a given Control-J session to the LOGCFG.DAT file.
- Fixed bug with some GetDXQTH (NAQP non NA countries counting as mults).
- Improved CW Memory defaults for NAQP.
- Added COMPUTER ID command. This will put a single character after the
QSO number of your log for a given computer. You can use the LOG PULL
command in POST to separate the logs by computer.
Version 5.59 on 4 January 1996
- The FT1000MP should be working now.
- Added FT1000MP CW REVERSE command. If TRUE, it uses the CW reverse mode.
- Fixed spelling of ALL CW MESSAGES CHAINABLE when ControlJ adds to LOGCFG.
- Added VHF enable for RAC contest.
Version 5.58 on 1 January 1996
- Added ALL CW MESSAGES CHAINABLE command.
- Only one SPACE BAR needed while AutoCQ and TwoRadioMode QSO QRV.
- Fixed possible garbage in call window when doing commands during AutoCQ.
- CW AutoCQ now times silence gap, not start times.
- Improved timing of AutoCQ messages when doing commands like Alt-D.
- Changed GridLoc contest to allow QSOs on different modes as well as bands.
- Added prompt and warning message if program is waiting for RST input.
- Numerous spelling and format cleaups (mostly in help).
- Added SCP MINIMUM CHARACTERS. If > 0, then SCP happens during call entry.
- Made Control-D in function key CW message make the message chainable.
The Control-D also acts as a space only if it is being chained.
- Fixed PageDown key operation in Control-J menu.
- Made entry with a / but no numbers not get counted as a valid callsign.
- Made QSLAndLog compatible with CallsignUpdateEnable.
- Added AskIfContestOver. If over, merges LOG.TMP to LOG.DAT.
- Fixed garbage OKOM.DOM file.
- Made Alt-A with empty call window and SCP display clear the display.
- Fixed AddDomesticCountry ('W') -> ('K') for defaults in FContest.
This fixes several contests that thought USA stations were DX.
- Made MultByMode for RAC contest.
Version 5.57 - 19 December 1995
- Added summary sheet for TenTen contest.
- Added RAC contest (including summary sheets).
- Added NZ FIELD DAY contest (including summary sheets).
- Added NZFieldDayQSOPointMethod.
- Added NZFieldDayExchange.
- Made ARRL output strip off $.
- Another stab at FT1000MP - hopefully it is now reading VFO frequency ok.
- Made FT1000MP use normal CW instead of CW-R (old FT1000 500Hz mode).
- Fixed zone override in CTY files (with brackets) not always working.
- Prevent program crash in case DVP ever does crash (which it doesn't).
- Increased delay time of DVP ready test - no longer times out.
- Made SCP support up to two ? marks in the callsign (match any character).
- Set default receiver address for Icom/Ten-Tec to 4.
Version 5.56 - 9 December 1995
- Fixed showing domestic multiplier status for 10 meter contest.
- Fixed bug preventing FT890 from working as Rig 2 interfaced radio.
- Fixed bug preventing 1200 baud Icom radio from working as Rig 2
- Added support for FT1000MP (Use FT1000MP as radio type).
Version 5.55 on 30 November 1995
- Added SINGLE RADIO MODE to disable Alt-R command.
- Added command support for function keys: BANDUP, BANDDOWN, DUPECHECK,
TOGGLECW, TOGGLEMODES, SWAPRADIOS. Use Control-C at the start of the
command and Control-D after it (ie: ^CBandUp^D).
- Made band map update instantly to band/mode changes from Alt-B/V/M.
- Slowed down 1000 count DVP loop to 3 milliseconds per second.
- Fixed error messages if country files not found.
- Added ADD DOMESTIC COUNTRY command (with CLEAR). This allows you to
redefine which countries are considered "domestic" as opposed to DX,
and thus use the domestic multiplier procedures. For example:
DOMESTIC COUNTRY = CLEAR ; Clears the existing domestic list
DOMESTIC COUNTRY = OE ; Adds OE to list (use same ID as
the .cty file has).
- Added ASK FOR FREQUENCIES flag. If you don't have an interfaced radio,
this decides if the program will prompt you for frequencies.
- Added NO LOG. If set to TRUE, QSOs can't be logged from this computer.
- Added DOMESTIC FILENAME command for LOGCFG. Finally lets you specify
a different file than the default. Make sure this comes after your
- Fixed POST's multiplier check (whew!). It doesn't crash and is actually
fun to use. It was broken when I added the domestic files.
- Fixed ARRL 160 DomesticFileName (was none).
- Fixed program crash when using ` key to send packet spots. Also when
sending spots or messages over the network.
Version 5.54 on 19 November 1995:
- SHIFT KEY ENABLE wasn't really available, but is now. Allows RIT and QSY
functions for shift keys to be enabled/disabled.
- When programming CQ ControlF1-F10 messages, the display would alternate
between ControlF1 and ShiftF1.
- Moved some memory around to make XT version possible again.
Version 5.53 on 16 November 1995:
- Fixed problem writing Summary sheet info to disk if \log\name not there.
- Fixed INSTALL so it can create directory on C drive.
- Made INSTALL ask to be run from disk or directory with program files on it.
- Eliminated possible Runtime 201 error if NoMode with visible dupesheet.
- Allowed for number pad keys to be assigned CW messages. If KEYPAD CW
MEMORIES is TRUE, keys 0 to 9 are tied to CQ CW memories ControlF1 to
- Even better SS exchange hacker (tested.. use it!).
- Fixed minor format error possibility with remaining country display.
- Created default remaining country list if none found in .CTY file.
- Added TEN TEN contest.
- Added "TEN TEN" QSO POINT METHOD.
- Made callsign update from exchange use last call, not first.
- If packet spot is NoBand or NoMode, ignore it so no more runtime 201 error.
Version 5.52 on 12 November 1995:
- Fixed bug with multi network. It seems solid now.
- Added Three Phone Five CW QSO Point Method.
- Made two radio stuff not send any CW if active mode <> CW.
- Changed Multi baud rate to 2400 baud (was 4800).
- Made dupes get sent to the other computers (helps keeps totals the same).
- Allowed band changes to be made during 2 radio QSOs.
- Added HEXDUMP command. Allows you to view a file to see what is there.
To use it, type TR HEXDUMP.
- Allow exchange being sent in two radio mode to be aborted with escape.
- Allow speed changes during second radio QSOs.
- Made Alt-D with no call input update BandMapBlinkingCall if there is one.
- Added switch to disable/enable RIT shift key function (SHIFT KEY ENABLE).
- Made the CQ sent with two radio QSO in progress come from Alt-F3.
- Made the CQ sent on inactive radio during dualing CQ QSO come from Alt-F2.
- Fixed simulator for Sweepstakes. Also improved the QSO numbers sent.
- Fixed double spacing in packet window.
Version 5.51 on 30 October 1995
- Added simulator support for SS.
- Made install 2.1 ask about overwriting .CTY files.
- Made \log\name be the first choice if another NAMES.CMQ file is found.
- Make remaining mults use index bytes instead of strings. This results
is much more capacity (300 domestic, 200 DX) and less memory used.
- Added SCP FILENAME command. Use this to indicate the name of the file
you want to use. You can enter the full path name, or just the filename
if it is in the directory you are in, or pointed to by your PATH statement.
- Fixed HILIGHT choice for REMAINING MULT DISPLAY MODE in LOGCFG.DAT.
- Change REMAINING DOM MULT DISPLAY to REMAINING MULT DISPLAY MODE. It
now affects all remaining multiplier displays (DX, Domestic and Zone).
- Note the command LITERAL DOMESTIC QTH is not in the manual. This
allows the domestic QTHs to be shown in the log just as entered. If
FALSE, the filtered domestic multiplier shown in the *.DOM file is
Version 5.50 on 21 October 1995 (this version uses about 18K less memory).
- Changed PTT Enable so that PTT is off during CW.
- Fixed possible rutime 201 errors when name memory disable turned off.
- Fixed UA9 showing up in europe for IARU contest.
- Allowed install program to put files in any directory.
- Name database and .CTY files can be anywhere PATH points.
- Fixed garbage in remaining mult window when name meory disable off.
- Added LITERAL DOMESTIC QTH flag. When TRUE, it will show domestic mults
the way the operator typed them in. When FALSE, they are filtered and
anways shown the same way.
- Removed DC ENABLE, DOMESTIC STATES and DOMESTIC PROVINCES commands.
- Made REMAINING DOM MULT DISPLAY command + ControlJ = NONE, ERASE, HILIGHT.
This controls how the remaining mult display works for domestic multiplers.
- Change dom mults to NONE, DOMESTIC FILE, GRID SQUARES, GRID FIELDS and
WYSIWYG. Domestic mult templates are now .DOM files. See 5.50 manual
for more details on how to create one of these files.
- Fixed club calls for S5.
- Added SHOW SEARCH AND POUNCE. Puts $ after each S&P QSO.
- Added DOMESTIC QTH DATA FILENAME command.