[TRLog] RIT control on Yaesu FT1000MP

[Tom Schaefer]

Hi All,

I have a question concerning RIT control on an FT1000MP. I was told that 
the option to adjust the RIT with the shift keys did not work on Yaesu 
radios, just Kenwood. So, I tried it and sure enough I could not adjust 
the RIT. I could clear it by hitting both keys, but not adjust it. I 
checked the command set for the RIT and there is a command to adjust the 
RIT in the command set. There is also one to interrogate the value. 
Since I can clear the RIT, I figured there was no additional option 
required to control this feature. Could this be a simple case of the 
command string for adjusting the RIT being implemented in this radio in 
the program. I am going to use a simple program to send the commands the 
manual suggests just to ensure it really should work, but if someone 
could tell me if the program even attempts this on an FT1000MP, that 
would be great.

Thanks in advance and good luck to all this weekend,

Tom NY4I in Utah

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html