[TRLog] KAM & TRLog

[William Liporace]

Well for all that was asking, IT WORKS GREAT!!!  It took right off when I
set it for 8bit packet port = true.
Lets back up a bit.  I have a KAM, 486-66, and an IC-765.  I am setup with
CT, NA, & TRLOG and I use LOGPlus for logging.  Both work with the whole
mess!
My KB2HUN.CFG file has the following info (forgive typos):
RADIO ONE CONTROL = SERIAL 1
RADIO ONE BAUD = 4800
RADIO ONE NAME = IC765
RADIO ONE TYPE = IC765
RADIO ONE RECEIVER = 44

PACKET PORT = SERIAL 2
PACKET BAUD RATE =4800
EIGHT BIT PACKET PORT = TRUE

That is the whole file.  I know you can add more.  I think that any of the
control-J commands can be added for faster setup (right tree?).  If you do
a hard rest on the KAM and have the above parameters setup, you can get
the KAM to configure for you.  I had to change the ABAUD to 4800. Mine was
setup for 9600.  I was also asked what kind of cable did I use.  It was a
standard serial cable, not a null modem cable.  
My cable for the IC-765 is a homebrew interface for computer control using
a single MAX-232 chip and a couple of parts.  If there are any other
questions, please let me know.  I hope this helps others.  Many people
helped and I THANK YOU!!!
73 es GL in test de KB2HUN Will   ...-.-

William Liporace KB2HUN          kb2hun@wizvax.net
763 Huntingdon Drive             KB2HUN @ K2TR (yccc packet cluster)
Niskayuna, NY 12309              KB2HUN @ WA2PVV (NEDA)
518-346-3804 home                518-471-2837 work


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA