[TRLog] TR keying questions
Mike
no6x@inreach.com
Fri, 24 Oct 1997 03:22:24 +0000
I had the same problem, I was getting RF into things. Might check that, if
not then try to change the xsistor.
GL
Mike...NO6X
At 07:32 PM 10/23/97 -0400, you wrote:
>
>
>
>
>I am guessing at the tr-log reflector address and also CC:ing to
>the contest reflector - please don't burn me to a crisp as I am not sure
>of the addresses and I'm stuck!
>
>Having a slight problem making the keying circuit work for sending CW
>through TR to my rig (using the parallel port). I have the 10k
>pullup resistors installed on the inputs from the paddle and substituted
>a 2N4124 for the 2N2222 keying transistor. When I touch the paddle,
>dit or dah side, I get a one-second long "dah" sent through to the rig
>regardless of which side of the paddle I press or what the TR cw keying
>speed is set to. Keying heard through the software sidetone sounds
>normal when sent with the computer (still sending that same "dah" as if using
>the paddle or for longer transmissions will add the dah's together for a
>simulated keydown condition), and when I pull the keying interface off the
>parallel port with TR running it sends a constant
>"dit-dah-dit-dah-dit-dah" which from reading the manual I believe is
>normal as well. Thoughts? Should the emitter connected to strobe at pin 1
>also be grounded? Help?
>
>Thanks,
>Scott Robbins, W4PA
>
>>
>>
>-------------------------------------------------------------------
>This e-mail message may not represent the viewpoint of my employer.
>>> The Ten-Tec Omni-VI Plus - unparalleled HF radio performance <<
>"I'm still walkin', so I'm sure that I could dance" - Grateful Dead
>-------------------------------------------------------
Check out my home page at http://home.inreach.com/no6x
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html