[TRLog] Labor Day Sprint
Mon, 1 Sep 1997 11:00:23 -0700 (MST)
To:Ken N6RO et al
As a new user of TR v6.05 I'm still trying to configure it properly for QRP
tests. Used it for CQC and BUBBA but can't get the exchange window to come
up with RST QTH NAME XXXX. Used MY CALL = NQ7X
CONTEST = GENERAL QSO
EXCHANGE RECEIVED = RST NAME QTH
INITIAL EXCHANGE CURSOR POS = AT START
SAY HI ENABLE = TRUE
Have 200+ names/calls/QTH set up in TRMASTER file...works fb.
Program will not accept different EXCHANGE RECEIVED sequence...would like it
to accept RST QTH NAME XXX with QTH & NAME from TRMASTER and RST and XXX to
be user programmed as default or typed in during the test.
Using it now, with the cursor AT START, I type in RST, name and qth appear from
TRMASTER if found/blank otherwise and I type in this part of exchange, then type
the received XXX(temp,etc). Program accepts this arrangement and prints out
ok, so is useable as is...
Used CQ EXCHANGE = TU %UR 55N AZ FLOYD 80 BK
Made no attempt to get points/scoring configured...edited these later.
You may have come up with same/similar configuration...if you or ANYONE has
something diff/better I'd appreciate a reply. Tnx
BTW, haven't tried it but TR does have SPRINT(NCJ) that should work ok.
73 Floyd NQ7X Phoenix ScQRPion DM33uq
ARRL ARCI G-QRP NORCAL DX WRKD HF=324 SAT=101 QRP=103
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html