[TRLog] very minor bug

[Richard L. King]

I found a very minor bug using packet with TR Log. This is how to recreate it.

I am in S/P mode and I tune across a station that I want to spot. The
Packet Spot Edit parameter is on and I put the station's callsign (A51PN)
in the callsign window. I then hit the "`" key and the SPOT = window comes
up with the spot data in it.

Now for some reason, I decide that I don't want to spot the station and I
want to cancel the spot entirely. It take four hits of the ESC key to clear
it out and I lose the callsign window data in the process. Here is what you
see:

After spot setup	SPOT = DX 7005.8 A51PN # (# represents the cursor)
After first ESC		SPOT = #
After second ESC	SPOT =		(Cursor has moved to callsign field)
After third ESC		SPOT =		(Callsign field is cleared)
After fourth ESC			(Spot field is finally cleared)


I think the spot field should be cleared and removed with one ESC key and
the callsign field left intact. Is there some reason that it works this way?

73, Richard

K5NA@BGA.COM
http://www.realtime.net/~k5na

--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html