[TRLog] Limited distance MODEMs
Thomas M. Schaefer
toms@inconnect.com
Fri, 20 Nov 1998 10:41:48 -0700
To take advantage of the new MODEM port option, does anyone know of a source
for limited distance MODEMS? In a past life, I used these things, but it has
been awhile. I am sure that Blackbox has them, but they are usually pricey.
I was think that the MODEM option would be good to connect two Field Day
stations together since we usually put the stations several hundred feet
apart.
Thanks,
Tom NY4I
-----Original Message-----
From: n6tr@teleport.com <n6tr@teleport.com>
To: trlog@contesting.com <trlog@contesting.com>
Date: Thursday, November 19, 1998 10:57 PM
Subject: [TRLog] TR Log - Version 6.34
>
>
> Release notes for TR Logging Program - Version 6.34
> 20 November 1998
>
>Version 6.34 - Released on 20 November 1998
>
> - Added MODEM PORT. This can be used along with the multi port to
> allow connection of a second port over a dedicated modem off a
> second serial port on a computer. Also, MODEM PORT BAUD RATE.
>
> - Fixed Control-F1 not working for DVP and DVK program. Using Control-F1
> to Control-F10 will instantly allow you to re-record DVP or DVK memories
> F1 to F1.
>
> - Improved DVK and two radio stuff functionality.
>
> - Changed WPX QSO Point method to give one point for own country
> (regardless of band). This complies with the new rules coming
> up next year.
>
>Version 6.34 beta - to W6QHS on 17 Nov.
>
> - Added support for sending exchange in two radio mode with DVK.
>
> - Fixed Exchange F1 not being sent when pressing RETURN with call in
> call window in search and pounce.
>
> - Changed LOG FILE NAME command to use SetUpFileNames.
> - Allowed ControlF1-F10 to also program DVK (not just DVP).
>
>
>
>
>Version 6.33 - Released on 12 November 1998
>
> - Fixed AltD bug - I think.
>
> - Fixed JIDX so you can enter prefectures 41 to 50.
>
> - Implemented MY PREC, MY CHECK and MY SECTION as LOGCFG.DAT commands. If
> you define these before your CONTEST statement, your CW messages will be
> setup the same way I use them at W5WMU. You will also be prompted for
> them if you select the SWEEPSTAKES contest from the contest menu. You
> can get to this menu by starting the program in a directory that doesn't
> have a LOGCFG.DAT file in it.
>
> - Fixed MY POSTAL CODE not being saved to config file upon start up.
> This is used in the ROPOCO contest.
>
> - Eliminated possibility of INSERT window showing up with country name.
>
>Version 6.32 - Released on 30 October 1998.
>
> - Created POST U E C to allow clearing out a data field in TRMASTER file.
>
> - Fixed USER4 and USER5 for USER INFO SHOWN and INITIAL EXCHANGE.
>
> - Improve startup of ROPOCO contest and created standard CW messages.
>
> - Added SCP COUNTRY STRING. Here you can list the countries you would
like
> the Super Check Partial feature to display. If this string is empty,
all
> countries will be shown. If you enter some country ID prefixes, only
> the ones from the countries listed will be displayed.
>
> For Example, for the Sweepstakes, you might enter this:
>
> SCP COUNTRY STRING = K, VE, KL7, KH6, KP2, KP4
>
> You can edit this from the control-J menu. The initial value is blank.
>
> - There were some changes to how the Control-J feature stores the
> parameter names. This shouldn't be noticed when using it.
>
> - Made IOTA QSO Point method to count 2 points if an IOTA is in my
country.
>
> - When editing the band map a second time, the cursor will now go back to
> last edit position.
>
> - When accessing an entry on the band map, the QSX and mult flags are
still
> displayed. These flags would disappear when an entry was selected.
>
> - The band map edit feature was broken when displaying all bands. This is
> now fixed.
>
> - Added WAG (Worked All Germany) contest and WAG QSO point method.
>
> - Made random CQs ignore messages that are blank. Normally, messages
> from F1 to F4 are used. But now, ones that are blank will not be used.
>
> - Updated CTY.DAT file with latest changes.
>
> - Made ROPOCO test allow space in middle of postal code.
>
> - When using LastName - if the bottom entry in the editable log window
> is blank, the program will now skip up to the next line with data in it.
>
> - Made European / Non-Scandinavian QSOs on low bands count 1 point, not 3.
>
> - Added QSO Point scoring for VK/ZL stations in VK/ZL contest.
>
> - Improved LastName to accept all numbers in Sprint.
>
> - Improved contest selection menu to allow you to start entering name.
> This is much quicker than using the arrow keys. If you mistype, the
> delete key can be used. This same type of feature has also been added
> to the Control-J menu for quicker access to the parameters.
>
> - Change TenTen QSO Points to 3 (DX & TenTen), 2 (not DX & TenTen) and
> 1 (not TenTen).
>
> - Made NAQP process QTH while entering into exchange - even with name.
> This fixes a common complaint about not being able to see the multiplier
> need status until you press RETURN.
>
> - Fixed Chapter working in initial exchanges.
>
> - Fix for DX entries in Eu Sprint.
>
>Version 6.31 - Released on 7 October, 1998.
>
> - Fixed RST DOMESTIC QTH to do QSO number correctly if > 2 entries.
>
> - Fixed DIG showing up instead of SSB in POST routines.
>
> - Removed old N6TR Duping file generation utility from POST.
>
> - Eliminated possibility of 0460Z as a sunrise/set time.
>
> - Fixed up CALQSOW6.DOM so only one CA.
>
> - Added PADDLE SPEED command (default = 0 & Control-J).
>
> - Added COAX startup option. Helps you determine electrical length of
> coax if you have two consecutive low Z frequencies from your SWR meter.
>
> - Made 10 meter QSOs in VK/ZL worth 3 points (was 2 points).
>
> - Made ExchangeMemoryEnable control initial exchanges from editable log.
> They were showing up even with EXCHANGE MEMORY ENABLE = FALSE.
>
> - Made MY STATE get used for initial INTERNET SPRINT exchanges (not ORE).
>
> - Fixed garbage contest name in contest selection prompt.
>
>
>Version 6.30 - Released on September 23, 1998.
>
> - PACC works for PA stations now. Added PACC COUNTRIES AND PREFIXES
> as a DX MULTIPLIER type.
>
> - Improved RSTAndDomesticOrDXQTH exchange to take its que from
> DOMESTIC COUNTRY.
>
> - Made QTH STAMP print country if no DX mults to deal with.
>
> - Added SALMON RUN contest. Added QSO POINT METHOD = SALMON RUN.
>
> - Added MINNESOTA QSO PARTY (or MQP). Added QSO POINT METHOD = MQP
> (2 ssb, 1 CW and 10 for W0EF).
>
> - Added WORLD WIDE LOCATOR (WWL) contest. Added RST AND GRID exchange.
> Added WWL QSO POINT method.
>
> - Enhanced sprint exchange parser. Allowed xxx yyy zzz # name QTH and
> also multiple number entries at end (uses last one).
>
> - Added asking for name/qth when starting sprint up.
>
> - Added RADIO ONE TRACKING ENABLE and RADIO TWO TRACKING ENABLE.
> Default is TRUE and they are available on Control-J. When FALSE,
> the radio information obtained via the serial interface is not
> used to change band/mode of the program.
>
> - Fixed Alt-F function keys not sending message in CQ mode.
>
> - Fixed initial exchange when using tail end key.
>
> - Fixed POST R L to do any band/mode. Same for POST L C.
>
> - Fixed USER 4 and USER 5 not working for USER INFO.
>
> - Added AN as legal prefix for IOTA designator.
>
> - Made summary sheet work for REGION 1 FIELD DAY.
>
> - Eliminated crash if hit Shift-Tab during middle of CQ QSO.
>
> - Fixed SendCW start up command.
>
> - Allow 57600 baud for radio interface. This is an experiment to see
> if it will work with the TS-570.
>
> - Fixed FT840 support (was broken by adding the 847 in 6.29).
>
> - Added SAC back to contest list. BTW, there are now 59 contests!
>
> - Forgot to mention that the Yaesu FT847 was supported, starting in
> version 6.28.
>
>Version 6.29 - 24 July 1998
>
> - Added MY IOTA - needs to be set to make QSO points work.
> - Fixed QSO points for IOTA for working own island.
> - Fixed ROPOCO QSO POINT Method.
> - Fixed 80 characater limiation to ARRL Log format.
> - Added CQ VHF back to contest prompt list.
> - Moved YT from NW to YU in P12.DOM.
> - Added summary sheet for ROPOCO contest.
>
>Version 6.28 - 5 July 1998
>
> - When using the TRMASTER update from a log (POST U E F F), the procedure
> would hang if a callsign was found with a lower case character.
>
> - Made Digital mode and radio interfaces work together.
>
> - Added ARRL FD QSO point method. 1 for SSB, 2 for CW, zero for D to D.
> Use MY FD CLASS to indicated your FD class (i.e., 1D).
>
> - Added ROPOCO contest (UK Rotating Postal Code). Added MY POSTAL CODE
> which is used in the ROPOCO contest as the first postal code sent.
> Added RST AND POSTAL CODE exchange type. Also added TEN POINTS PER QSO
> as a QSO POINT METHOD.
>
> - Made POST's L C command process WARC and VHF/UHF logs (would only do
> the standard six HF bands before).
>
> - Improved Icom interface to handle Transceive mode input.
>
> - Fixed bug with dupesheets not being done for all bands.
>
> - Added PORTTOFILE start up command. Takes input from a serial port and
> saves it in a file.
>
> - Added IOTADomestic multiplier type. This doesn't use a .DOM file,
> but it does look at the syntax of your IOTA designator and makes
> sure it is in the correct format. For example, if you enter EU5,
> the program will convert it to EU005. If you enter something that
> doesn't look at all like an IOTA number, it will not let you log it.
>
> - Made the time display get updated when sending from keyboard.
>
> - Fixed up the QSO points in the Region One Field Day for OZ and the U.K.
>
> - Fixed bug with super check partial not working all the time.
>
> - You can now move the grid map sideways without having to adjust the
> GRID MAP CENTER parameter. The Control-Left and Control-Right keys
> will move it left or right. Sorry to say that the keyboard doesn't
> generate a keystroke when Control-Up or Control-Down is pressed.
>
> - Made date work back to 1900 (was 1988). TR is now year 1900 compliant!
>
>Version 6.27 - 11 June 1998
>
> - Added MULTI PORT BAUD RATE command. Default and max value = 4800.
>
> - If you are using a radio different than a Kenwood and have SHIFT KEY
> ENABLE = TRUE, the shift keys will always move the VFO frequency
> instead of doing nothing in the CQ mode (which is when the Kenwood's
> RIT is adjusted).
>
> - Added BAND MAP ALL BANDS (contro-J, default = False). Lets you
configure
> the band map to show you all spots, not just the ones for the band you
> are on.
>
> - Fixed bug with callsigns sometimes disappearing when pressing SPACE BAR.
>
> - Made Region One Field Day in UK count double QSO points for 160 & 10.
>
> - Fixed problems with lower case in grid squares.
>
> - Made TR READ not make dates in upper case.
>
> - Fixed possible dupes in partial call list.
>
> - Added LOGLASTCALL CW function key command. Allows you to log the last
> station you worked. This can be combined with the BANDUP or BANDDOWN
> commands to log QSOs on different bands quickly.
>
> - Fixed display of prefixes during get zone routine.
>
> - Fixed bug with > 6 character calls not working with partial calls.
>
> - Fixed bug with beeping computers when calling CQ and network.
>
>Version 6.26 - 24 May 1998
>
> - Fixed packet spots not being passed around network.
> - Enhanced ARRL log format to allow you to enter sent information.
>
>Version 6.25 - 5 May 1998
>
> - Attempted to make POST run on 300 MHz Pentium-II.
>
> - Updated CTY.DAT file.
>
> - The menu of contests that comes up if you start without a LOGCFG.DAT
> file now allows you to use the arrow keys to select the contest you
> want.
>
> - Added WARC bands to POST's continent report.
>
> - Added RUSSIAN DX contest and RUSSIAN DX to QSO point methods.
>
> - Eliminated QRP adder for JA INTERNATIONAL DX test.
>
> - Added DIGITAL MODE ENABLE (Control-J - default = False).
>
> - New ARRL Field Day rules implemented.
>
> - Improved POST L M (multiplier check) for Helvetia contest.
>
> - Change RSTQSONumberAndPossibleDomesticQTH to ignore a QTH entry for DX.
> This fixes TR READ for the Helvetia contest.
>
> - Added PACKETFILE startup command. This allows you to take a file and
> have it processed as if it was text being received from a TNC.
>
> - For Region 1 FD, made any "unknown" country act like DL 2/3 4/6. This
> means it works for the UK now.
>
> - Bugs fixed:
>
> - Super check partial bug - if you typed JA1, then delete three times,
> then JA1, no partial calls would be displayed.
>
> - If you did Alt-D for a dupecheck, the band map wasn't updated
properly.
>
> - Fixed POST crash during mult check.
>
> - Fixed QSO number not updating when QSO NUMBER BY BAND and band
change.
>
> - Fixed multi network communication bug resulting in crashes in high
> error environments.
>
> - Fixed ZoneMode for JA INTERNATIONAL DX (uses CQ zones, not ITU).
>
> - Fixed clean up of country name and insert windows if dupe checked.
>
> - Fixed crash of ControlJ if use PageDown at end of list.
>
> - Fixed tuning (shift/control keys) bug due to uninitialized CWBuffer.
>
>
>Version 6.24 released on 23 March 1998.
>
> - Fixed distance error introduced in 6.23 (larges distances were
negative).
> - Fixed total score always being zero.
> - Fixed the beam heading window format problem.
>
>Version 6.23 released on 21 March 1988
>
> - Made the ? character work during tail end process. Also improved
> support of QUESTION MARK CHARACTER during tail end and start sending.
>
> - Memory consumption reduced by 32K from version 6.22. We believe
> performance has only been sacrificed at non critical times. Also,
> if you don't send any CW with the program, you gain an addition 3K.
>
> - Added new feature to flag callsigns in the bandmap that are either
> country, prefix or zone multipliers. Note that the status is marked
> when the callsign is added to the band map - or updated after you
> work that station. The QSO is flagged with a happy face.
>
> - A number of numeric overflows were detected and fixed. These were
> a result of saving some memory and allowing me to enable range
> checking. Normally, these would have just given bogus results, but
> are now "fixed" so they won't happen. A good example is checking the
> beam heading for an unknown country. Other examples include reading
> in a LOG.DAT file with bogus data.
>
> - If you use the DEBUG option (so the simulator works itself) and have
> the CW TONE = 0, the program will now run much faster. No CW messages
> will be sent. You should see rates around 4,000 per hour. Also, the
> band will change from time to time to beter simulate actual activity.
>
> - The TRMASTER database had some problems when it didn't have enough
> memory to continue. When your free memory got down below 5K, the
> TRMASTER feature (Super Check Partial) feature was supposed to turn
> itself off. Well, it partially did, but part of it (the possible call
> routine) kept running. This created some real problems as the program
> tried to read pieces of the TRMASTER.DTA file that were not there.
>
> This has all been cleaned up and the TRMASTER feature totally disables
> itself when memory gets low.
>
> - Some work has also been done when you run out of memory again - after
> the TRMASTER.DTA file has been disabled. A few rough edges have been
> sorted out and the program should behave well when running out of
> memory. In fact, you should be able to continue working people
> forever. They just won't be added to the dupesheet or partial call
> & initial exchange memory.
>
> - When sending or receiving a QTC for the WAE contest, the function key
> messages are now disabled. This was necessary during one of the
> exercises to decrease memory use.
>
> - Fixed bug where FreeMemory display didn't update with ESCAPE in SSB
mode.
>
> - Some delays had been added to the TR READ feature to do some testing
> in the previous version. These should have been removed before 6.22
> was released, but I forgot. They are now gone.
>
> - Fixed bug with not reading in QSO points correctly from LOG.DAT file.
>
>Version 6.22 released on 6 March 1998
>
> - Fixed band changes this hour for multi network.
>
> - No overwrite of ? characters in INSERT mode.
>
> - Cursor always goes to ? when moving to call window, even if INSERT mode.
>
> - Added FINDFILE start up command - shows which directory TR will file the
> specific file you type in (i.e., TR FINDFILE TRMASTER.DTA is
interesting).
>
> - Added HELP start up command. Shows all the commands for reference.
>
> - Allowed ESCAPE to exit you from blank packet edit entry.
>
> - Increased stored size of prefixes that appear CTY.DAT to 7 characters.
> Fixes problem with SM1TDE matching SM1TDE/4U.
>
> - Fixed flaky DVP init bug. Sometimes when starting TR, it wouldn't
> get the proper shared memory address from the DVP.
>
> - Made ` (packet spot) use last QSO's call if the CALL WINDOW is blank.
>
> - Fixed bug with wrong CW Speed being used for Control-A prefixed CW
> messages (sent on inactive radio).
>
> - Fixed bug with distances in European DX contest. This was a new bug
> in version 6.21. A new routine was added that had better accuracy,
> but it wasn't protected from the lower case characters.
>
> - Allowed DownArrow to be used to enter exchange before call in CQ MODE.
> When you UpArrow back into the call window, you can then type the call,
> press RETURN and the station's call and CQ EXCHANGE will be sent.
>
> - Fixed memory dump of TRMASTER. While it appeared that the memory
> was freed up (based upon the free memory displayed), the feature
> kept working.
>
> - Changed to S48P13DC.DOM for CQ 160. Counts DC mult now.
>
> - Fixed bug with / stations not being called by name.
>
> - Allowed editable window changes to affect initial exchange and
> possible calls.
>
> - Initial exchanges are now loaded from LOG.DAT files if the parameter
> PARTIAL CALL LOAD LOG ENABLE is true.
>
>Version 6.21 released on 16 February 1998
>
> - Added BAND CHANGES as a legal value for HOUR DISPLAY. This can be
> used to count how many band changes have been made in each hour.
>
> - If you started the program without a LOGCFG.DAT file and set up the
> ARRL DX contest, the remaining multiplier display might be in the
> wrong mode until you exited the program and restarted. This is now
> fixed so the proper remaining display comes up at the start.
>
> - Made PACC QSOByMode = FALSE and MultByMode = FALSE.
>
> - Improved sprint parser to handle 4 or 5 entries. You can now enter
> the following exchanges in addtion to the old ones.
>
> NAME QTH # NAME QTH (uses the second name and QTH)
> # NAME QTH # (uses the second number)
> NAME # NAME QTH (uses the second name)
> QTH # NAME QTH (uses the second QTH)
> NAME QTH # NAME (uses second name)
>
> You can still put a callsign in any of the above if you have
> UPDATE CALLSIGN ENABLE = TRUE and it will remove the call before
> processing the rest of the exchange.
>
> - Added sunrise/sunset times. They show up with the beam heading display
> when enabled with the MY GRID command. Made Sunrise/Sunset use MyGrid
> for the QTH if the the call in the call window = MyCall. This allows
> you to know your own sunrise/sunset time.
>
> - Changed default background color for beam heading window to white.
> Also, extended the beam heading window to the left 10 spaces to make
> room for sunrise/sunset times.
>
> - Added RADIO ONE ID CHARACTER and RADIO TWO ID CHARACTER parameters.
> Works similar to the COMPUTER ID, except the letter shows which radio
> was used. Do not use this and the COMPUTER ID feature at the same
> time.
>
> - Fixed problem with improper QTH showing up in some cases during the
> the sprints and NAQP. This typically happened in when switching
> from S&P to CQ mode and working a DX station.
>
> - Fixed JST as a radio type for radio two. We have a report that the
> program doesn't work with the JST145. Investigation in process.
>
> - Fixed bug with Alt-D QSO leaving cursor in call window when pressing
> the space bar.
>
> - Made Alt-D work on SSB even if the DVP is not enabled.
>
> - Tried to make the program less memory hungry. It uses about 5K less
> than the previous version.
>
> - Went to more accurate distance calculator. Now matches some of the
> popular programs in Europe.
>
> - Fixed BROADCAST ALL PACKET DATA not supported in LOGCFG.
>
> - Made Packet Window and Control-J timeouts only work when using multi
> port.
>
>
>Version 6.20 released on 5 January 1998
>
> - Fixed callsign you answered in CQ mode not being sent.
>
> - Added COUNTRY INFORMATION FILE parameter (control-J). This allows you
> to name a file that has information for different countries in it. This
> information will be displayed in the editable log window at the same
> time you are shown other information for that country (i.e., mult status
> or beam heading).
>
> The file would have the country ID (use the one shown in the CTY.DAT
> file) by itself on a line, then up to five lines of data afterwards.
> A blank line indicates that there is no more data for that country.
> There is no limit on the file size.
>
> For example:
>
> JA
> This will be displayed when working a station in Japan.
> So will this.
>
> HL
> This will be displayed when working a station in Korea.
>
> - Removed beep when sending radio information to other stations on multi
> network. This was put in during testing and I forgot to remove it.
>
> - Made ESCAPE in CQ MODE with no entry in call window repaint editable
log.
> This means you can recover from having something else in the editable
> log window like the country information or multi messages.
>
> - Added ControlHome to view last five multi talk messages.
>
> - Made multi message aborted with ESCAPE key not get sent.
>
>Version 6.19 released on 4 January 1998
>
> - When using the multi network, the program can now update the remaining
> multiplier display without doing anything. Before, this was disabled
> as it took a long time on some of the slower computers. The new
> parameter is MULTI UPDATE MULT DISPLAY and the defaul is TRUE. You
> can change it with Control-J. When it is FALSE, the remaining
multiplier
> display isn't updated until another QSO is made, or a band/mode change
> is executed.
>
> - There is now a 20 second timeout when using the multi network and you
> leave the computer in a mode that doesn't allow it to process network
> traffice (i.e., packet window, keyboard CW or view log).
>
> - Added new footswitch mode to act like the F1 key (FOOT SWITCH MODE =
F1).
> This works for both CQ and S&P modes.
>
> - A check has been added when using CQ zones and the RST ZONE exchange to
> make sure the zone you have entered isn't over 40.
>
> - Some changes have been made to make the super check partial feature
> more responsive on slower computers.
>
> - Made POST's R Q case sensitive. Before, PA and Pa would be counted
> as the same multiplier.
>
> - Allowed DUPECHECK or DUPE CHECK for footswitch mode. It was one way
> on the control-J menu and the other in the manual. Either one will
> work now.
>
> - When selecting a spot from the bandmap, you will now be left in a
> state so you can call the station with a RETURN. Before, the initial
> exchange had already been filled in and pressing RETURN would try to
> log the QSO. Also, if you try to select a spot while in the middle
> of a CQ mode QSO, the program will ask you to either log or abort the
> QSO first.
>
> - Fixed dualing CQs on CW. A bug was introduced where the radio that
> had the CQ stopped on it might be left key down. This was a problem
> only if using different ports for your CW (as opposed to using a
> single port and a relay).
>
> - Added CROATIAN contest and CROATIAN QSO point method.
>
> - Added TEN MINUTE RULE (NONE, TIME OF FIRST QSO). This is intended to
> show you how long it has been since you made your first QSO on whatever
> band you are on.
>
> - Fixed FT1000MP again. Beta tested this time and guaranteed!
>
> - Added SKIP ACTIVE BAND (Control-J - false). When TRUE, doesn't allow
> you to move your active radio to the same band as your inactive radio
> when using the Alt-B or Alt-V commands.
>
> - Added SPEED command to Function Key Message. Needs the Control-C at
> the start of the command and Control-D at the end. Either put a
> numeric speed (1 to 99 WPM), or any number of + or - characters to
> make relative adjustments.
>
> - Allowed W M and R in "power" for ARCI contest (used for decimal power
> or milliwatts). The W is required to indicate that the entry is not
> an ARCI member number.
>
> - Improvements to DVK operation:
> o Escape will abort any message (not just F1).
> o DVK0 now works in message (was broken).
>
>
>Version 6.18 released on 6 December 1997
>
> - Enhancements to ARCI contest. Added RST POSSIBLE DOMESTIC QTH AND
> POWER exchange. The power gets used for ARCI numbers as well, but
> put a W after power levels sent by non members. The W will be logged.
>
> Added ARCI QSO POINT METHOD for ARCI. If a no W found in the "power",
> the full 5 points will be scored. If a W is found, you get 2 points
> for the same continent, or 4 points for DX.
>
> - Switched mode and frequency for MP back the way it was (freq then mode).
>
> - Prevented possible crash if packet frequency > 2,147 MHz.
>
>Version 6.17 released 23 November 1997.
>
> - Reversed the order of sending the mode and frequency to the FT1000,
> FT920 and FT1000MP. This means your mode will be set before setting
> the frequency. Under some radio configurations, this could result
> in an error equal to the CW offset.
>
> - Fixed Dualing CQ process on SSB when using the DVP. Also, some minor
> clean up of DVP sequencing when using two radio mode. Pressing F1
> to resend your callsign while a dummy CQ is in progress works quicker.
>
> - In the S&P mode, if you use F2 to resend your exchange just after
> logging a QSO, it will send the SEARCH AND POUNCE exchange even if
> you have a REPEAT SEARCH AND POUNCE exchange programmed. Furthurmore,
> it would set the "ExchangeHasBeenSent" flag so that when you make
> your next S&P QSO, it will send the REPEAT S&P EXCHANGE. This has
> now been changed so that if you press F2 with no call window or
> exchange window entry, the REPEAT S&P exchange is sent and the
> ExchangeHasBeenSent flag is not set. If you don't have a REPEAT S&P
> exchange programmed, you won't notice this as the S&P exchange gets
> sent all of the time.
>
> - The CONTEST NAME is now part of the RESTART.BIN header. This means
> if you change the contest you are operating in your LOGCFG.DAT file,
> the program won't try to use the RESTART.BIN file that might already
> be in the directory. This eliminates any possible problems with
> incorrect configurations which could cause strange behavior (i.e.,
> missing remaining multiplier info).
>
> - Some people have seen a negative number appear in some log entries
> when displaying frequency. Two changes have been made here. First,
> a band-aid has been added so that if for any reason a negative
> result appears for the frequency, it will be set to zero. This
> happens with we don't get frequency data from the radio and then
> subtract out the megahertz. Secondly, an improvement has been made
> in how I filter the frequency data in an attempt to use the previous
> non-zero frequency when I come up with zero.
>
>
> This list stops at the version covered by the latest release of
> the manual. You can view previous release notes on the web at
> www.contesting.com/_trlog/.
>
>
>--
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html