[TRLog] ARRL VHF Contest (fwd)
George Fremin III
Thu, 3 Sep 1998 14:58:38 -0700 (PDT)
> (FN03XX) to get a precise beam heading. On the microwave bands that can be the
> difference in making a contact or not. The difficulty is that you cannot log a contact
> with the extra 2 letters. You must backspace to remove the offending letters, and then
> press enter. Am I doing this right?
You are doing right.
Maybe Tree could make it possible to enter EM00ST and have
TR-Log ignore the ST part.
You can enter the grid in the call window to
get the beam heading if you like.
> Second, if I enable the grid square map via logcfg.dat and allow VESA, the whole
> screen goes to VESA. Not good for my aging eyesight!!
> But if I enable the grid map with control-J, or turn the VESA off in logcfg.dat
> the grid map comes up in the middle of the screen hiding the editable callsigns, the
> grid totals for each band, and partially the QSO's needed/ multi needed windows. BUT,
> the text on the screen is "normal" sized and much easier to see. Is there any way to
> move the grid map to the bottom of the screen? Or any other suggestion?
There is not a way to change this.
On 6m I run the grid map in VGA mode on the higher bands I run it
in the normal mode - it does cover up the eidt window but as you
make contacts you will see that the edit window
and needs window come into view and it works pretty well.
I find it useful to change the beam heading, mult and qso needs
windows and text a diffrent color than the grid map so that
they are eaiser to see.
George Fremin III "I'm talkin' 'bout that outlaw X
Austin, Texas It's cuttin' through the air.... "
512/416-7010 -- "Heard it on the X"
email@example.com -- ZZ Top
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html