[TRLog] sbdvp and connections

[Igor Sokolov]

Start SBDVP with -P1 which tells SBDVP to send PTT to your radio from
Parallel 1 port

Igor, UA9CDC
-----Исходное сообщение-----
От: Nick Cooling <ncooling@velocity.net>
Кому: 'tr log server' <trlog@contesting.com>
Дата: 3 августа 1999 г. 4:34
Тема: [TRLog] sbdvp and connections


>
>   I am having trouble with TR  6.40 in regards to the sbdvp program. I
>built a cable for the parallel port to control cw and ssb. The cw works
>fine I pulled pin 18 for the ground and pin 17 routed through a NPN diode
>and to the cw jack. I setup the ssb in parallel as suggested by another
>email from the server. I know I have the connections correct because I can
>key up the radio from the Mic jack in cw mode but not in ssb mode. Is there
>something in the programming that I can modify the software to key up the
>radio in ssb mode for the length of the voice recording.
>
>Nick  N3TOZ
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>
>


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html