[TRLog] Re: Intermittant FT-1000

[John Battin]

OK...I think I found out why I was having trouble getting it to work. After
Windows installs the com ports, they are apparently available for windows
programs but "shut-down and run dos" does not result in a clean boot to the
new configuration. If I get the ports set right in windows and do a shut
down and re-start then when I do the "restart in dos" it works. I was
advised by w5fuv to not get into dos that way but use f8, which I am doing
now.  So now I need to see if it going to quit again.  Is there a problem
because  I let the hard drive shut down while everything  is running ??? Is
this a problem??What do you recomend ??? Thanks soooo much to you and the
others.  John  K9DX
-----Original Message-----
From: John Battin <jbattin@email.msn.com>
To: n6tr@teleport.com <n6tr@teleport.com>
Cc: trlog@contesting.com <trlog@contesting.com>
Date: Tuesday, June 15, 1999 8:15 PM
Subject: [TRLog] Re: Intermittant FT-1000


>
>Sure enough...when it does not work, tr ports says: com 1 03f8, com2 03e8,
>com3 02e8,com4 0000-- program will use 02e8. It is probabily this conflict
>with c3 that shuts the radio on c3 down.  When it works tr-ports says
>03f8,02f8,03f8,02e8.  I have tried so hard to get some consistant
>information on what makes it start and what makes it quit, but the only
>consistant thing is that it is not consistant. At this moment, it will not
>run no matter what I do. I can shut off all the comm ports, re-install them
>and it still is as the first list. When I look at the comm ports with
>windows it shows the second set of numbers (the ones that work) but when I
>shut down and go to dos I see the first set. Is there not some config. file
>for dos that you can put the dos comm port parameters into??   Thanks for
>your patience...John
>-----Original Message-----
>From: n6tr@teleport.com <n6tr@teleport.com>
>To: jbattin@email.msn.com <jbattin@email.msn.com>
>Date: Tuesday, June 15, 1999 11:20 AM
>Subject: Re: Intermittant FT-1000
>
>
>>> I always run TR in dos...that is the machine starts in windows and I  do
>>> "shut down and restart in dos".
>>
>>Hmmm - then I would think that windows would be pretty much out of the
>>picture.
>>
>>Perhaps you can send me some more data to help understand what is
>>happening.  There is a command TR PORTS that will display some
>>information about what ports TR sees.  If you can run this in both
>>cases (failing and not failing), it might help turn up a clue.
>>
>>Tree
>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>




--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html