[TRLog] Ukrainian

[Igor Sokolov]

Thank you Roberto, I have forgotten about that ADD DOMESTIC COUNTRY in the
heat of the contest. Just thought that since the contest is supported and I
will have no troubles and only started to play with logcfg file few minutes
before the beginning.
Anyway I managed to work quite a few stations with minor inconvenience (put
1 after oblast designator for Ukrainian stations). Hopefully Tree will fix
that  for the next year for Ukrainian contest. That only shows one more time
that the public deposit of different logcfg.dat files is essential
especially for a number of minor contests. That can save time for many would
be participants and increase their number.

Igor, UA9CDC
-----Исходное сообщение-----
От: Soro Roberto <roberto.soro@sia.it>
Кому: 'Igor Sokolov' <ua9cdc@dialup.mplik.ru>; Dale L. Martin
<kg5u@hal-pc.org>; trlog@contesting.com <trlog@contesting.com>
Дата: 7 ноября 1999 г. 22:18
Тема: RE: [TRLog] Ukrainian


>
>I had also that type of problem.
>Solved after some try and a close look at the manual
>This is OK but
>dx multiplier = cq dxcc
>Domestic multiplier = domestic file
>domestic filename = ukraine.dom
>Exchange received = RST QSO NUMBER or DOMESTIC QTH
>
>
>You need to add also this:
>
>ADD DOMESTIC COUNTRY = UR
>
>And after that it is definitely OK!
>Sorry to read the mail just now!!
>Best 73.
>Bob I2WIJ -J49WI
>
>> -----Original Message-----
>> From: Igor Sokolov [SMTP:ua9cdc@dialup.mplik.ru]
>> Sent: Saturday, November 06, 1999 6:39 PM
>> To: Dale L. Martin; trlog@contesting.com
>> Subject: [TRLog] Ukrainian
>>
>>
>> Just tried to set up TRLOG to work in the UKRAINIAN contest. It is
>> supposed
>> to be supported startin ver 6.44
>>  1. This contest is not in the menu of contests that pops up when you
>> start
>> TR in an empty directory.
>> 2. Put the contest name into logcfg manually. It only let you work
>> Ukrainin
>> stations  which is not correct.
>> 3. Put into logcfg the following:
>>      dx multiplier = cq dxcc
>>      Domestic multiplier = domestic file
>>      domestic filename = ukraine.dom
>>      Exchange received = RST QSO NUMBER or DOMESTIC QTH
>>
>> That type of exchange is also mentioned in the manual as
>>      RST domestic qth or qso number
>>
>> (Is there any difference between the two?)
>>  In overlay file only one of them is listed and none of them worked for
>> me.
>> Wonder if I did something wrong. I have tried 6.44 and 6.45
>> I can send my locfg file if needed
>>
>> Ended up with
>>    RST qso number and possible domestic qth
>> That calls for entering some figure after the letters for domestic qth
>> when
>> working Ukrainian stations. Is there a better workaround?
>>
>>
>> Igor, UA9CDC
>>
>>
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>> Submissions:              trlog@contesting.com
>> Administrative requests:  trlog-REQUEST@contesting.com
>> Problems:                 owner-trlog@contesting.com
>> Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>
>--
>FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>
>


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html