[TRLog] QTH error

[Igor Sokolov]

Logging SI as S5 and ER as UA etc is perfectly valid. Anyway if you insist
on SI or ER just use QSL MODE = QSL and LOG

73,
Igor, UA9CDC

 During the CQ 160 contest, I found that when entering the received
exchange,
> the software enters only the true RST, but not the actual QTH that I type
> in.  This is most apparent with S5 where the true exchange usually
contains
> SI as the QTH.
> Others  are European Russia with the software insisting on
> UA even though I type in ER, and some of the Czech stations give their QTH
> as CZ, but the software insists upon including OK in the exchange.  Of
> course there are many other examples.
>
> My "fix" was to continuously add real-time notes (CTRL-N) in my log and
use
> a text editor after the contest - a  rather tedious procedure, not to
> mention the extra key strokes needed in the contest.
>
> Evidently I've misconfigured something. How can I get the software to
> actually log exactly what I enter as the exchange?
>
> 73,
> Riki, 4X4NJ
>
>
> --
> FAQ on WWW:               http://www.contesting.com/trlogfaq.html
> Submissions:              trlog@contesting.com
> Administrative requests:  trlog-REQUEST@contesting.com
> Problems:                 owner-trlog@contesting.com
> Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>
>


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html