[TRLog] Icom

[Marion J. Henson]

My IC-746 worked flawlessly with V7.48 during the contest however I'm
still learning some features.  Tom Schaefer had problems with his IC-738
when entering a frequency in the call box.  The IC-746 does switch to
split operation with the VFO B switching to the selected transmit
frequency and VFO A staying on the current receive frequency.  The
narrow filter does not change either.  If I switch modes from cw to ssb
the sharp filter is disabled and is not activated when switching back to
cw again.

A minor problem still exists when going to vhf operation.  The 746
follows TR's commands upwards to 144 MHz with the Alt-B command but when
reversing downward with the Alt-V command a 1 preceeds the 50 MHz
frequency [i.e. 150.xxx.xx] and TR Band readout switches to ALL.  Using
Alt-M switches between CW, DIG and SSB.

To answer your questions Tree:
    1.  Radio is IC-746
    2.  TRLog Version 6.48
    3.  Baud rate = 1200.  (Have experimented with Auto and other rates
but 1200
         seems.best.
    4.  I don't know how I should set up the IC746 to run the "TR
RADIODEBUG".
         144 MHz ?  50 MHz?  Mode?

Thanks much for a great program.  73, Marion, W6NKR



--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html