[TRLog] Icom problems

[Soro Roberto]

You can set a command in you config file as:
 
NO POLL DURING PTT = TRUE
 
This will avoid reading while transmitting.
 
Jeff, please, can you tell me where did you put those capacitors??
Tnx.
Bob,I2WIJ (IR2V in contest) 

mailto:i2wij@qsl.net <mailto:i2wij@qsl.net>  
http://www.qsl.net/i2wij/ <http://www.qsl.net/i2wij/>  

-----Original Message-----
From: Bob Wolbert, K6XX [mailto:k6xx@jps.net]
Sent: Monday, November 20, 2000 6:44 PM
To: Jeff; trlog@contesting.com
Subject: RE: [TRLog] Icom problems


Jeff,
 
I had a similar problem with a homebrew interface while operating
portable/mobile. It was RF getting into the interface cabling while TR was
polling the rig. Solved with capacitors (0.01uF).
 

73 de Bob, K6XX
k6xx@arrl.net 

 
-----Original Message-----
From: owner-trlog@contesting.com [mailto:owner-trlog@contesting.com]On
Behalf Of Jeff
Sent: Saturday, November 18, 2000 11:41 AM
To: trlog@contesting.com
Subject: [TRLog] Icom problems


Hi All
does anybody else have problems with frequency display stability in TR when
using an Icom rig?
The display is fine in LOG-EQF "sorry about the slip of tongue" but in TR
whilst the rig is set to say 14.275 MZ the display will sometimes indicate
145.2MZ Seems a bit strange to me.
otherwise it seems fine.
Any comments?
 


--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html