[TRLog] Band map in Two radio node

[Clive Whelan]

<<The integration of the band map into this process promises to 
be a powerful combination. The band map will help you identify 
stations very quickly. When you tune within 200 hz of a band 
mapped station, his call will blink and the exchange 
(precedence, check, and section) will be shown. If the check and 
section match, you don't need to listen for the callsign. When 
using two radios, the band map should stay on the band you did 
your last band map entry on (i.e. the second radio.) >>

Hmm, Alt D does indeed put a band map entry on radio 2, and it 
blinks, and the band map stays on that band. So far so good.

I was then pleasantly surprised that when tuning radio 2, other 
band map entries flashed as usual despite apparently no polling 
taking place on radio 2 ( is there?). However this proved to be 
an intermittent capability. I doubted I had seen it, but can 
confirm it does occasionally happen, if so how, and is this an 
intended function?


However even when this did happen the callsign was never entered 
into the call window, as happens after pressing space following 
Alt D. To have this happen and be ready to call the band mapped 
station with <space> would be really useful. Also it would be 
super to have the NEXT BAND MAP operate as I have this 
programmed to a function key.

Can someone clarify these issues please?

73

Clive
GW3NJW
gw3njw@arrl.net



--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html