[TRLog] COM Port

[NR1DX]

The info is in the TR Manual, you will need to go out to the System screen and bring up the properties for that port so you can get the address that your computer assigned to that port. Having said all that  the command <SERIAL PORT 5 ADDRESS = XXXX > as noted in the manual did not work for  me. A couple of queries to this reflector produced no useful hints as to why not..... local results may vary (let mew know!). Also make sure when you are looking at the properties for COM5 that you set the baud rate to 4800.

Dave
NR1DX



At 03:23 PM 10/26/00 +0100, Jay Pryor wrote:
>
>I just put a new serial card in a PCI slot and it has assigned COM5 to one 
>of the ports.  I am told by a technician that on this computer model there 
>is no way to change it to COM1 through COM4.
>
>Is there a way to get TRLog to recognize COM5 either for control or keying?
>
>Thanks,
>
>- Jay/K4OGG
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/trlog
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html
> 

--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html