[TRLog] OMNI VI and Alt B/V Observations

[Kevin Arber]

Good advice!  Actually I have tried all of the ICOM rig settings that
I know of.  Using IC735 is the only one which hangs the frequency
display.  All of them seem to be sticky using Alt B/V on my OMNI VI+.
I observed the following:
IC751 or IC751A gives an invalid configuration error.
IC765 causes the filter setting to change from .50 to 2.4 upon
changing freq from the call window.

73, Kevin
W3DAD
----- Original Message -----
From: "A. Sewell N5NA" <n5na@arrl.net>
To: <trlog@contesting.com>
Sent: Monday, December 30, 2002 7:01 PM
Subject: Re: [TRLog] OMNI VI and Alt B/V Observations


> Try using IC781 as the rig with your Omni VI.  I tried IC735 with
basically
> the same results as you.  Setting the rig to IC781 worked great for
me
> though.
>
> 73,
>
> Alan  N5NA
>
> ----- Original Message -----
> From: "Kevin Arber" <karber@smart.net>
> To: <trlog@contesting.com>
> Sent: Monday, December 30, 2002 16:02 PM
> Subject: [TRLog] OMNI VI and Alt B/V Observations
>
>
> >
> > The Alt B/V function seems to be sticky on my OMNI VI+.  Using Alt
B
> > to change from 160 to 80 moves the highlight from 160 to 80 and
then
> > back again, Alt B again, changes the radio to 80 but leaves the
160
> > highlight and the band indicated as 160CW (1820.0 kHz), Alt B
again
> > (third time), moves the band, and frequency display to 80.
However,
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog