[TRLog] PTT output from the parallel port

[kl7ra]

Hi Bob

I also noticed the PTT is not enabled when DVK is used. I have
the voice keyer PTT run the radio but I was hoping to use the
delay feature. This would allow the relays to lock up in the home
brew amps before the  DVK pulse went positive.

I would vote to add it unless I missed something in the setup as well.

73 Rich  KL7RA



 



>
>    Over the Holidays, I finished building an interface using the
>parallel port. The keyer functions properly.
>CW output is fine. The footswitch works as it should. I even have the
>voice keyer (Speech Master)
>calling CQ from pin 3. I have PTT working fine when operating CW, or
>with the footswitch What I don't
>have is PTT output in conjunction with the voice keyer.
>    In a single mode contest, or on the low bands, I can work around
>this. What I was hoping to do, was to
>make the station as "Fool Resistant" as possable for VHF Contests. My
>goal was to have that single point PTT
>output from TR, key a sequencer, therby protecting preamps and relays.
>    I've read all the .CFG commands and I don't see any way to enable
>PTT that is related to pin 3.
>Have I missed one? Or can anyone suggest a way to accomplish this, that
>I have missed?
>
>Thanks in advance for your help!
>
>Bob  N3RN
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/trlog
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html