[TRLog] CQ was logged as QSO

[Mike Gilmer, N2MG]

Having done exactly what you did:
I CQed for a while, bandmap shows CQ/####, then I tuned off the frequency,
then back to the CQ freq.  The "CQ/####" gets loaded in the log.  I had to
delete it, or I very well could have logged it.

I agree...this should not happen.

I used Version 6.71 (rig control and bamdmap enabled of course)

Mike N2MG


Tack Kumagai JE1CKA/KH0AM wrote:

> In the following situation TR logged CQ as a QSO with "CT"
>
> Rig control and band map was enabled.
> TRlog version =6.70
>
> when I push F1 or C/R, CQ message was sent and "CQ/#### 21025.3" was
> displayed on the bandmap.
> Then I QSY to other bands for S&P and back to that band(exact same CQ
> frequency). Bandmap data (CQ/####) was set to call window and I hit
> the Enter key to call CQ, CQ/#### was logged as QSO with CT station.
> I recommend not to set CQ/#### in the call window.
> Did anyone had same problem?