[Trlog] Mode change in bandmap

[J. Edward (Ed) Muns]

This is due to jumping to a band map frequency that is above the SSB cut-off
frequency.  The default on 160 is 1840 KHz, but you can change it to
anything you want with the BAND MAP CUTOFF FREQUENCY = 1880000 parameter (as
an example).

73,
Ed - W0YK

> -----Original Message-----
> From: trlog-bounces at contesting.com
> [mailto:trlog-bounces at contesting.com]On Behalf Of Thomas R. Williams
> Sent: Monday, December 08, 2003 5:44 AM
> To: trlog at contesting.com
> Subject: [Trlog] Mode change in bandmap
>
>
> Maybe someone has already addressed this...
>
> When using the band map to jump to a station, my FT1000MP changes
> modes from CW to LSB. The stations got into the bandmap correctly
> as I was S&P'ing my way along in the 160m contest.
>
> Here's the catch... it doesn't seem to happen when I select a
> station from the first (left hand) column, just from the second
> column of calls.
>
> Using the latest version. Previous version used (6.72) didn't do this.
>
> 73,
> Tom N2CU <><
>
>
>
>
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog