[TRLog] Manipulating the MP sub VFO

[Jim Smith]

Hi Ken,

I haven't tried this but I think it should work.

1.  Program an F Key to send the A<>B command to the radio.  (i.e. swap 
VFOs)
2.  Put this command in stdcfg.dat
3.  When you want to QSY the B VFO
a.  Hit the abovementioned F Key.  This will swap the VFOs.
b.  Type in the frequency and hit ENTER.  The A (formerly B) VFO will 
QSY as desired.
c.  Hit the F Key again and, voila, A is back where it was and B is 
where you want it.

Let me know if you need help with the F Key programming.

Hope this helps

73 de Jim Smith    VE7FO


Ken Adams K5KA wrote:

> A question for the collective:
>
> Is there a method to type in a frequency and have the sub
> VFO on a FT1000MP go to that frequency, but NOT activate
> the transmit light?   ie; send the sub VFO to a freq, but
> DO NOT go into split mode.
>
> Ken K5KA
>
> _______________________________________________
> TRLog mailing list
> TRLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>