[Trlog] using ALT-N, ALT-B and ALT-V

[alan.kaul at att.net]

When in SSB mode and using Alt-N, to change frequency, or ALT-V and ALT-B to change 
bands on my FT-847, the rig always switches the freq/band then automatically changes to 
USB.  Even if I am in LSB before I enter the command. 

Also, when on CW and with narrow filter switched in, ALT-N, -V and -B changes the freq/band 
as planned but automatically switches the rig into the WIDE FILTER mode

This happens with every version of TR-log I've used in the last 3-4 years (including 6.78a). 

I've lived with it so far, but I am wondering if there is a simple fix for either of these problems?
--
Alan Kaul W6RCL LaCanada, CA 91011
e-mail:  w6rcl at amsat.org
http://home.att.net/~alan.kaul/index.html	
		
			
> Using the latest version of TR 6.78+, I am having the log miss the mode
> occasionally (nonssb or noncw qso).  This past weekend just playing around
> in SS, I tried changing the "ICOM COMMAND PAUSE AND ICOM RESPONSE TIMEOUT"
> values.  I finally settled on ICOM COMMAND PAUSE = 300 (although manual says
> this is ignored after 6.71) AND ICOM RESPONSE TIMEOUT = 500 and this seemed
> to eliminate the problem.  I am using 781's and have had this problem for a
> while although in some versions it seems to be more pronounced.  Has anybody
> had any similar experiences or does anyone have any suggestions?  Does
> upping these values hamper any other responses?
> 
> Mike W9RE
> 
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog