[Trlog] WinTelnetX Instructions

[Anthony Rodgers]

And excellent (and humorous!) instructions they are, too. I got it all
working in about 5 minutes flat (not counting the 90 minutes spent getting
Windows to behave itself!) and it works like a charm.

Many thanks to K1TTT!

Now, if they could just come up with a Mac version.....:-)

73 de VA7IRL,
-- 
Anthony Rodgers
Email: VA7IRL at rac.ca
Numeric Pager: 1-800-331-6351
Text Pager: arodgers at txt.bellmobility.ca
MSN/AIM/iChat ID: arodgers at mac.com



From: "J. Edward (Ed) Muns" <w0yk at msn.com>
Reply-To: w0yk at msn.com
Date: Fri, 24 Oct 2003 12:10:21 -0700
To: <trlog at contesting.com>
Subject: [Trlog] WinTelnetX Instructions

K1TTT has posted a set of instructions
(http://www.k1ttt.net/software/wintelnetx_w0yk.pdf) which I wrote for using
WinTelnetX to connect an Internet PacketCluster node to TR-Log.  You will
have to substitute your serial port numbers (COM1, COM2, etc.), preferred
PacketCluster URL, the exact logon prompt from the PacketCluster and your
own call sign, but this should all be fairly obvious as you go through the
instructions.

These instructions assume that you use the TR-Log default of 2400/7/E/1
settings for the packet port.  If you set command EIGHT BIT PACKET PORT =
TRUE, then you need to set WinTelnetX and your Windows serial port to
2400/8/N/2 (or 1200 or 4800 Baud if you change command PACKET BAUD RATE from
its default 2400).

73,
Ed - W0YK