[Trlog] Rig Two Polling

[WG0M at aol.com]

Hi All:
Working on getting Rig 2 to be controlled by TR after changing computers has 
turned out to be a challenge.  I see an error message

"RADIO TWO polling disabled"

When I do Alt R, I see RIG 1 and RIG 2, but the RIG two is not active nor is 
the frequency displayed in TR correct.  Rig 2 is on serial 4.  Rig one is on 
serial 2 Baud rates are set at 4800 for both.

Any help?

73's

Michael WG0M