[Trlog] FW: Re: [PVRC] TR-Log on fast computer.

[Craig Cook]

I have a need to run old DOS programs at work (Thank
You, Motorola!) I sometimes get by with disabling the
cache in the bios. There was a program floating around
for a while that was called mo'slo. It slowed down
fast PCs to run older software. You might give a
serious look at www.n1mm.com I used TR for years, and
am perfectly satisfied with N1MMLogger. Free for
Windows. I'm not one of you big-shot contesters, but I
think a few more big-shots are starting to use it. 
73, N7OR 

--- kd4d at comcast.net wrote:

> Hi all:
> 
> Anybody seen a problem running TR-Log on a fast
> computer?
> 
> 73,
> 
> Mark
> 
> > >> >
> > >> >
> > >> >> Hi ALL,
> > >> >> I've recently assembled rather fast computer
> (P4, 3.2 GHz, 800 MHz 
> > >> >> FSB, 1
> > >> >> GB
> > >> >> RAM) and partitioned one of hard drives in 2
> partitions, on one of 
> > >> >> which
> > >> >> I've loaded MS-DOS 6.22. TR-Log, loaded on
> that partition works 
> > >> >> extremely
> > >> >> unstable, runtime error pops up from time to
> time and computer locks 
> > >> >> up.
> > >> >> I
> > >> >> have to cold boot it. Same version of N6TR
> works perfectly well on 750
> > >> >> MHz
> > >> >> IBM Laptop and 133 MHz Compaq dinosaur. I
> came up to a conclusion that
> > >> >> 3.2
> > >> >> GHz is too fast for TR-Log.  If so, where's
> the threshold in clock 
> > >> >> speed
> > >> >> for
> > >> >> TR-Log? Any methods of artificially slowing
> down the computer when
> > >> >> running
> > >> >> N6TR?
> > >> >> Thanks in advance.
> > >> >> 73!
> > >> >> Boris, WF3J
> 
> 
> ----------------------  Forwarded Message: 
> ---------------------
> From:    kd4d at comcast.net
> To:      "Brass Pounder" <wf3j at comcast.net>
> Subject: Re: [PVRC] TR-Log on fast computer.
> Date:    Wed, 24 Nov 2004 09:55:39 +0000
> 
> The version of DOS that came with Windows 98SE had
> lots of
> improvements...including the ability to handle disk
> partitions
> of more than 2 GBytes, FAT32, the ability to boot
> and run from a partition that isn't at the beginning
> of a disk, etc..
> 
> I'm pretty sure 6.22 doesn't have FAT32 and it
> doesn't have the
> rest.
> 
> It may be worth a shot.   Download the boot disk and
> try it.
> 
> 73,
> 
> Mark
> 
> 
> > Mark,
> > I did send this question to the Author of the
> Program (I am a lifetime 
> > subscriber) but no answer yet. My comp has FDD,
> DVD-R/W, CD-R/W, two 80 GB 
> > Hard Drives, G-Force video card with 128 MB.  As
> far as I know MS-DOS 6.22 
> > is the last version. I don't like PC DOS (because
> of commands' format). As I 
> > mentioned, I do a simple test on TR-Log: press and
> hold <alt> and <V> or <B> 
> > (band up or down). After few seconds I get runtime
> error. Even with MoSlo 
> > running I have the same problem. Nothing like this
> happens neither on 
> > ThinkPad (750 MHz) nor Compaq Presario (133 MHz).
> I use LPT1 for keying, no 
> > cluster. I have C-MOS keyer connected in parallel
> with LPT1 output.
> > It's OK to ask the question on mailing list.
> Please forward me any info 
> > worth reading.
> > 
> > 73!
> > bp (wf3j)
> > 
> > ----- Original Message ----- 
> > From: <kd4d at comcast.net>
> > To: "Brass Pounder" <wf3j at comcast.net>
> > Sent: Tuesday, November 23, 2004 9:43 PM
> > Subject: Re: [PVRC] TR-Log on fast computer.
> > 
> > 
> > > Another thing you might try is a newer version
> of DOS.  You can
> > > grab enough for a quick test from
> www.bootdisk.com.  Get
> > > a Windows98SE boot floppy.  Does the machine
> have a floppy
> > > drive?  If not, I can send you instructions for
> creating a DOS
> > > boot CD on a machine with no floppy.
> > >
> > > 73,
> > >
> > > Mark, KD4D
> > >
> > >
> > >> Hi Mark,
> > >> MS-DOS Partition is exactly 2 GB. I took a new
> 80 GB HD, loaded MS-DOS 
> > >> 6.22
> > >> on 2 GB, then loaded WinXP Professional on
> remaining 78 GB. I have 
> > >> another
> > >> 80 GB HD as backup. From time to time I'm
> ghosting master drive on it, so 
> > >> if
> > >> something goes awfully wrong I can always ghost
> the slave onto the 
> > >> master.
> > >> This method gives me much room for
> experimenting. Brian, K3KO told me 
> > >> about
> > >> MOSLO Program. I've downloaded ver.1.4 and
> tried to run TR-Log. Works
> > >> better, but still locks up on a simple test: I
> hold <alt> and <V>  or <B>
> > >> (band UP or DOWN) and after few seconds the
> computer locks up. I tried
> > >> different speeds - same result. I'll be using
> Compaq 133 MHz desktop in 
> > >> the
> > >> contest - TR-Log works like a charm on it.
> > >>
> > >> 73!
> > >> bp (wf3j)
> > >>
> > >> ----- Original Message ----- 
> > >> From: <kd4d at comcast.net>
> > >> To: "Brass Pounder" <wf3j at comcast.net>
> > >> Sent: Tuesday, November 23, 2004 9:10 PM
> > >> Subject: Re: [PVRC] TR-Log on fast computer.
> > >>
> > >>
> > >> > Hi Boris:
> > >> >
> > >> > Is the MSDOS partition more than 2 GBytes? 
> Is it located at the
> > >> > beginning of the drive?
> > >> >
> > >> > I've run it just fine on 1.6KHz pentiums...
> > >> >
> > >> > 73,
> > >> >
> > >> > Mark, KD4D
> > >> >
> > >> >
> > >> >> Hi ALL,
> > >> >> I've recently assembled rather fast computer
> (P4, 3.2 GHz, 800 MHz 
> > >> >> FSB, 1
> > >> >> GB
> > >> >> RAM) and partitioned one of hard drives in 2
> partitions, on one of 
> > >> >> which
> > >> >> I've loaded MS-DOS 6.22. TR-Log, loaded on
> that partition works 
> > >> >> extremely
> > >> >> unstable, runtime error pops up from time to
> time and computer locks 
> > >> >> up.
> > >> >> I
> > >> >> have to cold boot it. Same version of N6TR
> works perfectly well on 750
> > >> >> MHz
> > >> >> IBM Laptop and 133 MHz Compaq dinosaur. I
> came up to a conclusion that
> > >> >> 3.2
> > >> >> GHz is too fast for TR-Log.  If so, where's
> the threshold in clock 
> > >> >> speed
> > >> >> for
> > >> >> TR-Log? Any methods of artificially slowing
> down the computer when
> > >> >> running
> > >> >> N6TR?
> > >> >> Thanks in advance.
> > >> >>
> 
=== message truncated ===



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail