[Trlog] TR on a Win XP machine

[Mark Bailey]

Hi David:

Very interesting.   Thank!.  I don't believe CT supports shared IRQ's.  
There, the Byterunner
driver may have the advantage, but it costs A LOT more.  :-)

Can anyone verify that the new "IRQ-aware" version of TR-Log will 
support shared IRQ's? 
An old post from Tree from October leads me to believe that it will...as 
long as they are
mapped to IRQ 3 or 4.  Configuring for CT requires assigning IRQ's other 
than 3 or 4 for
the serial ports.

"BTW - for the Orion and new way I collect data from the serial ports, I 
am going to have to break down and teach TR how to deal with ISRs.  
However, I intend to intercept both interrupts (3 and 4), so it 
shouldn't matter how they are setup - I will find the offending UART."

If so, then I may buy a few of these... :-)

73,

Mark, KD4D


David Hachadorian wrote:

>Following up on my msg of yesterday, everything is working now, 
>including paddle and a/b relay on the parallel port.
>
>If anyone is looking for a DOS/Windows PCI board that has four serial 
>ports, using just one shared IRQ, here is a good candidate that is 
>cheaper than the usual Byterunner and SIIG devices:
>
>http://www.newegg.com/app/ViewProductDesc.asp?description=15-124-019&depa=0
>
>It works fb here.
>
>Dave Hachadorian, K6LL
>Yuma, AZ 
>
>_______________________________________________
>Trlog mailing list
>Trlog at contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
>
>
>  
>