[Trlog] CW message for callsign?

[Jim Smith]

Maybe I'm missing something here.  Surely, as a TR user, you've had TR 
send your call thousands of times.  You accomplished this by programming 
the function key message memories appropriately using ALT-P, C or E as 
appropriate.  Couldn't you do the same thing here?

73, Jim	VE7FO

rt_clay at bellsouth.net wrote:
> Here's an interesting experiment I tried a while back with trlog:
> 
> The K2 (and maybe other recent radios?) allows you to send cw by sending an ascii string to the radio over the RS-232 interface. I tried using this method to send the cw function keys in trlog, and it works quite well (latency is low enough). The cw speed is adjusted with the pot on the K2 panel, but could also probably be changed with a remote command. A paddle can be connect directly to the K2 for manual sending. You do lose the cw keyboard in tr doing this.
> 
> The point of doing this is for running TR in Windows or Linux where cw timing is an issue.
> 
> However, there was one major problem...there is no cw message in trlog to send your callsign! Is there a "secret" message name for the callsign? Or is sending the callsign handled separately from the function and exchange keys? It would also be great to be able to have ESC send the "kill cw" command (I did do this with a separate function key and it worked fine).
> 
> One other issue to to work out an interlock to prevent transmitting simultaneously in So2R, but I imagine that can be fixed with a small external circuit.
> 
> Tor
> N4OGW
> 
> 
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
> 
>