[Trlog] 756 Pro III

[Don Moman VE6JY]

RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE TYPE = IC756PRO
RADIO ONE RECEIVER ADDRESS = 92
RADIO ONE BAUD RATE = 1200

I have various Pro and PRO III and 7800 but I call them all 756PRO and
change the default address to 5c hex or 92 decimal.  Out of the box the
PROIII would have an address of  6e  or 110 decimal...   Can easily be
changed in the menu.  I just use 1200 baud because I always have but as
long the program matches the radio menu selection, one should maybe bump
it up to 4800.  That used to be the suggested limit for non interrupt
ports Trlog style...

73 Don


-----Original Message-----
From: trlog-bounces at contesting.com [mailto:trlog-bounces at contesting.com]
On Behalf Of George Fremin III
Sent: April 11, 2007 4:40 PM
To: TR Log Reflector
Subject: [Trlog] 756 Pro III




What settings are needed for a IC 756 Pro III and TR-Log
to enable them to talk to eachother?


-- 
George Fremin III - K5TR
geoiii at kkn.net
http://www.kkn.net/~k5tr


_______________________________________________
Trlog mailing list
Trlog at contesting.com http://lists.contesting.com/mailman/listinfo/trlog