[Trlog] 756 Pro III

[Mike Wetzel]

I tried 5c and 6e and get the same results as before using either
Icom756ProII or Icom756Pro  (cw-r, split and filter-not working correct) but
the weird thing is I cannot get the s/w-radio to talk using 1200 only 4800.

Mike W9RE

-----Original Message-----
From: trlog-bounces at contesting.com [mailto:trlog-bounces at contesting.com]On
Behalf Of Don Moman VE6JY
Sent: Wednesday, April 11, 2007 1:10 PM
To: 'TR Log Reflector'
Subject: Re: [Trlog] 756 Pro III

RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE TYPE = IC756PRO
RADIO ONE RECEIVER ADDRESS = 92
RADIO ONE BAUD RATE = 1200

I have various Pro and PRO III and 7800 but I call them all 756PRO and
change the default address to 5c hex or 92 decimal.  Out of the box the
PROIII would have an address of  6e  or 110 decimal...   Can easily be
changed in the menu.  I just use 1200 baud because I always have but as
long the program matches the radio menu selection, one should maybe bump
it up to 4800.  That used to be the suggested limit for non interrupt
ports Trlog style...

73 Don


-----Original Message-----
From: trlog-bounces at contesting.com [mailto:trlog-bounces at contesting.com]
On Behalf Of George Fremin III
Sent: April 11, 2007 4:40 PM
To: TR Log Reflector
Subject: [Trlog] 756 Pro III




What settings are needed for a IC 756 Pro III and TR-Log
to enable them to talk to eachother?


--
George Fremin III - K5TR
geoiii at kkn.net
http://www.kkn.net/~k5tr


_______________________________________________
Trlog mailing list
Trlog at contesting.com http://lists.contesting.com/mailman/listinfo/trlog

_______________________________________________
Trlog mailing list
Trlog at contesting.com
http://lists.contesting.com/mailman/listinfo/trlog