[Trlog] VSEMUIO BYTERUNNER AND DOS

[WG0M at aol.com]

Can anyone tell me how to set up, config, install whatever I need to do to  
make my byterunner 410H work in DOS?
 
I am so far outside of my sandbox here
 
Below is what I copied from the readme file.  So now what?  Can  anyone give 
me step by step instructions?
 
Mainly I need help with the autoexec.bat file stuff.   Addressing I can do.  
I have run the VSSHOW.exe and am okay there.   And I know how to set up TR.
 
What I don't know how to do is the autoexe.bat  stuff.
 
 
VSEMUIO should be started before the user application. We suggest to run  it
in the AUTOEXEC.BAT file.  The program accepts one command line  paramater
which gives the name of the configuration file to be used.  If  omitted the
name vsemuio.cfg in local directory will be assumed.
 
Syntax:
 
VSEMUIO
or
VSEMUIO <file name>
 
Configuration file
 
VSEMUIO is very sensitive to syntax. Each line describes one port. 
For  serial ports:
 
S,<real io>,<virtual io>,<virq>,<clock>,<com  number>
 
< real io>      real io address of the port  on the VScom card.  To find  out
what the actual IO addresses of the ports are, run  the
program VSSHOW.EXE.
< virtual io>   virtual address to be  used.
<virq>         virtual  irq for the  port
<clock>         Factor by  which the clock of VScom card is higher  than
standard clock.  (This is generally 8)
<com  number>    the COM number under what the system can access  this port.
 
Example for COM1 and COM2:
 
S,D400,03f8,4,8,1
S,D408,02f8,3,8,2
 
Michael  WG0M