[Trlog] DX Doubler setup

[Randall K Martin]

Scott, Use the same port for both radios, and set the RELAY CONTROL PORT 
appropriately.  (Dave K6LL is right on target!)

Here is my logcfg.dat

73
Randy K0EU

MY CALL = K0EU
MY STATE = CO
MY NAME = RANDY
CONTEST = SPRINT
DISPLAY MODE = COLOR
RELAY CONTROL PORT = 1
TWO RADIO MODE = TRUE
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
KEYER RADIO TWO OUTPUT PORT = PARALLEL 1
PADDLE PORT = 2
SWAP PADDLES = TRUE
RADIO ONE TYPE = ft1000d
RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE NAME = LEFT(1)
RADIO TWO TYPE = FT1000D
RADIO TWO CONTROL PORT = SERIAL 3
RADIO TWO NAME = RIGHT(2)
FOOT SWITCH PORT = 2
FOOT SWITCH MODE = QSO NORMAL
AUTO S&P ENABLE SENSITIVITY = 500