[Trlog] one more question: Orion II and TR 6.87
w4au at verizon.net
Fri May 25 07:25:57 EDT 2007
Hi Bob -
With my Orion I Version 6.87 changes frequency fine when change bands
manually with the buttons on the rig. I don' think there are any
differences between the Orion I and II so far as computer control are
concerned. Here is the radio part of my logcfg.dat file (you can ignore the
RADIO ONE NAME = OMNI_IV
RADIO ONE TYPE = IC781
RADIO ONE RECEIVER ADDRESS = 4
USE IRQS = TRUE
RADIO TWO NAME = ORION
RADIO TWO TYPE = ORION
TWO RADIO MODE = TRUE
RADIO TWO CONTROL PORT = SERIAL 2
RADIO ONE CONTROL PORT = SERIAL 1
73 - John, W4AU
At 03:33 AM 5/25/2007, you wrote:
>I installed what I thought was TR ver 6.87, but my configuration shows 6.86
>When I configured for the CQ WPX contest, all is working OK EXCEPT TR-Log
>does not acknowledge band changes I make using the buttons on the Orion II.
>(i.e. if I switch fm 20m to 40m, TR-Log display still shows me on 20m)
>However, if I command a band change via my computer keyboard through TR-Log
>(ALT-B), the computer successfully commands the Orion II to change bands.
>Anything I can do to make TR-Log recognize what band I'm on when the
>progam/Orion II are turned on?
>Thanks es 73, Bob Hervatine N2NS (ex: W6FRH)
>Trlog mailing list
>Trlog at contesting.com
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.8.0/817 - Release Date: 5/24/2007
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.8.0/817 - Release Date: 5/24/2007 4:01 PM
More information about the Trlog