[Trlog] CQ160 and version 6.93

[Mike Wetzel]

I am running "smartdrive" but no disk cache.  "Ramdrive" is presently
commented out in my config.sys.


Using Win98 but not using the GUI to run TR in DOS.

Here is my config.sys file:

DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
rem device=c:\dos\ramdrive.sys 2048 512 64 /a
rem device=c:\windows\ramdrive.sys 2048 512 64 /a
BUFFERS = 40,0
DOS=UMB
rem LASTDRIVE=E
rem FCBS=4,0
DOS=HIGH
STACKS = 18,512
FILES = 40
rem SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:1024 /p

mem:
			Total		Used		Free
Conventional 	640K 		19K		621K
Upper			123K		74K		49K
Reserved		384K		384K		0K
Extended (XMS)	39,813K	2,333K	37,488K


Total under 1M	763K		93K		670K

Largest free upper memory block	36K

MS-DOS is resident in upper memory area.

Ramdrive.exe is in the Windows dir.

I took out the rem on  " rem device=c:\windows\ramdrive.sys 2048 512 64 /a"
but did not see any improvement.  Guessing  somehow it's not set up correct.


Any ideas?

Thanks,

Mike W9RE

-----Original Message-----
From: Tree [mailto:tree at kkn.net] 
Sent: February 28, 2009 4:16 PM
To: Mike Wetzel
Cc: 'TRLog Reflector'
Subject: Re: [Trlog] CQ160 and version 6.93

On Sat, Feb 28, 2009 at 04:15:06PM -0500, Mike Wetzel wrote:

> Using 6.93 my computer really seems to be a lot slower.  After I hit the
> return to log the call things stand still for a second or so and I am not
> able to see if the section is there before I type it in.  Anyone else
seeing
> this slowness or is it just me?

Are you using a disk cache?

Tree