[Trlog] trlinux - raspberry pi

[Ted Albert]

Thanks to George and Kevin I was able to build trlinux for Raspbian Jessie. Running it on my Raspberry Pi 2 and connected to my K3/10 via a usb-serial adapter I am able to control the K3 as I did from my Ubuntu x86 system. I am also able to send CW via the same adapter with the K3 setting: PTT--KEY = OFF--dtr. Works like a charm. I will be running this configuration for my QRP entry in the Stew Perry this weekend.

73 de Ted, AB8FJ

> On Dec 21, 2015, at 12:35 PM, George Fremin III <geoiii at kkn.net> wrote:
> 
> 
> Hello,
> 
> Yesterday I compiled trlinux on a Raspberry Pi.  It is something I
> waned to try for sometime.  It seems to work. Running the 'DEBUG'
> command where tr runs the simulator in test mode the program seems to
> be able to handle very high rates on this hardware.  This Pi is either
> an A or the first B version I do not recall which. I am thinking it is
> an A board.  In any event it does work.  Hooked up to my TV via the
> HDMI I am getting all of the trlinux beeps and CW side tone out of the
> TV speakers. In the simulator the CW side tone seems to have some
> issues now and then when the OS is off doing something else.
> 
> I have not hooked it up to a radio or a winkey or yccc so2r box to see
> if it is really usable but based on what I see so far I think it
> would be very usable for contest logging.  Seems to be faster than the
> old 486 DOS box I was using until a few years ago. 
> 
> Here is a screenshot.
> 
> https://goo.gl/photos/9qFJ8sq4pZYJzFwv5
> 
> Big thank you to W9CF for helping with some issues with the code that
> was causing the compile to fail.
> 
> 
> -- 
> George Fremin III - K5TR
> geoiii at kkn.net
> http://www.kkn.net/~k5tr
> 
> 
> _______________________________________________
> Trlog mailing list
> Trlog at contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog