[Trlog] MiQP Cabrillo in TrLinux

hg chapoton hgchapoton at gmail.com
Tue Apr 19 19:16:34 EDT 2022


Ok, I omitted a couple things.

The above will generate a header that looks like this:
START-OF-LOG: 3.0
CREATED-BY: TR Log POST Version Linux 0.49
CALLSIGN: NA8V
CONTEST: IARU-HF
ARRL-SECTION: mi
CATEGORY-ASSISTED: NON-ASSISTED
CATEGORY-BAND: ALL
CATEGORY-MODE: MIXED
CATEGORY-OPERATOR: SINGLE-OP
CATEGORY-POWER: HIGH
CATEGORY-STATION: FIXED
CATEGORY-TRANSMITTER: ONE
CLAIMED-SCORE: 351120
CLUB: Bay Area DXers
NAME: Greg Chapoton
ADDRESS: 5589 Emmett Rd.
ADDRESS: Emmett, MI  48022

1)  since we're not in the IARU Contest, replace that with
MICHIGAN-QSO-PARTY
     I looked back at previous logs I submitted and  they are silent about
the contest name but it's probably better to be safe than sorry.

2)  When you request the cabrillo in post, it will ask you for your "ARRL
Section".  Mine above shows as "mi".  that is NOT correct.  If one is out
of Michigan, enter the proper 2 letter abbreviation for your state/province
or if dx, then just "DX"

This yields something like:
START-OF-LOG: 3.0
CREATED-BY: TR Log POST Version Linux 0.49
CALLSIGN: NA8V
CONTEST: MICHIGAN-QSO-PARTY
ARRL-SECTION: STCL
CATEGORY-ASSISTED: NON-ASSISTED
CATEGORY-BAND: ALL
CATEGORY-MODE: MIXED
CATEGORY-OPERATOR: SINGLE-OP
CATEGORY-POWER: HIGH
CATEGORY-STATION: FIXED
CATEGORY-TRANSMITTER: ONE

greg/na8v

On Tue, Apr 19, 2022 at 3:15 PM hg chapoton <hgchapoton at gmail.com> wrote:

> To make my .cbr file, I made a directory "test".  for a config file, I
> used:
> MY CALL = NA8V
> CONTEST = IARU
> DISPLAY MODE = COLOR
>
> *Copy* your LOG.DAT file into this directory and run POST.
>
> Post will ask a series of questions.  For "what was the zone you sent?",
> just put in your state or county abbreviation.
>
> I would imagine TrDos would work the same?
>
> greg/na8v
>


More information about the Trlog mailing list