[Trlog] Request - remove the sidetone
martin at ok1rr.com
Tue Jun 7 14:39:46 EDT 2022
Yes, I use STDCFG.DAT. Here is:
MY CALL = OK1RR
DISPLAY MODE = COLOR
AUTO CALL TERMINATE = TRUE
AUTO SEND CHARACTER COUNT = 4
BAND MAP ENABLE = TRUE
DUPE CHECK SOUND = NONE
WINKEYER PORT = SERIAL /dev/ttyACM1
RADIO ONE TYPE = rigctld;4532;/dev/ttyUSB1;2047;115200;38;
PACKET PORT = SERIAL shell
EIGHT BIT PACKET PORT = TRUE
MY GRID = JO70FB
CW TONE = 0
PADDLE MONITOR TONE = 0
LOG FREQUENCY ENABLE = TRUE
MULTIPLE MODES = FALSE
NO POLL DURING PTT = TRUE
DE ENABLE = FALSE
FARNSWORTH ENABLE = FALSE
WEIGHT = 0.96
ASK FOR FREQUENCIES = FALSE
AUTO S&P ENABLE = TRUE
AUTO S&P ENABLE SENSITIVITY = 200
BEEP ENABLE = FALSE
POSSIBLE CALL MODE = ALL
PTT ENABLE = FALSE
PTT TURN ON DELAY = 0
Dne 07. 06. 22 v 15:15 Tree napsal(a):
> Martin - can you verify that you can turn off the tone with the Control-J
> setting? (CW TONE).
> If you can - you can simply put the command:
> CW TONE = 0
> in a STDCFG.DAT file (locate it where the TR program is) and that will
> become you new default.
> Tree N6TR
> On Tue, Jun 7, 2022 at 2:10 AM Martin Kratoska <martin at ok1rr.com> wrote:
>> I have a Microham DXP here that includes a K1EL version 3.1 chip. It
>> works very well, in TR4W with Wine the monitor is turned off after
>> starting the program. CQRlog - the monitor is turned off after startup.
>> It is enabled only in the TR Log, ported for Linux. Why?
>> I don't understand why it's not the other way around - by default the
>> monitor is turned off and who needs it should turn it on. TR Log for
>> Linux behaves exactly the opposite of other programs. Why? I don't
>> understand those who want it this way...
>> Under these circumstances, I have no choice but to either modify the
>> relevant piece of code myself or continue to ignore TR Linux and give
>> priority to TR4W with Wine.
>> Martin, OK1RR
>> Dne 07. 06. 22 v 1:47 George Fremin III napsal(a):
>>> On Mon, Jun 06, 2022 at 10:55:53AM +0200, Martin Kratoska wrote:
>>>> can I ask to remove everything concerning sidetone (monitor tone)
>>>> from the winkeyer support routine? It is not needed, there is
>>>> already the radio sidetone. Why should the keyer beep on the table?
>>> I disagree - I think there are times when someone might want to make
>>> the keyer sidetone to work. I just had one here - I do not have a
>>> radio hooked up but it was a great way to play with the software and
>>> prove that I am sending code to the keyer.
>>> And you can, as a user, turn off the sidetone in the winkeyer with the
>>> ctl-j menu setting. It seems better to have the user in conrol of
>>> that and have it work just as it does now.
>> Trlog mailing list
>> Trlog at contesting.com
> Trlog mailing list
> Trlog at contesting.com
More information about the Trlog