[UK-CONTEST] CT HELP !

[G3SJJ]

Don, I seem to remember you having this problem a few years ago with
the station at the HF Convention. I suggested that you set the TNC to
CT defaults, ie 9600 N81, rather than setting the TSRs to your TNC
defaults. It might be worthwhile trying that gain.

BTW I always use NA for contests, it is so much easier to setup and
doesn't use TSRs.

73 Chris


----- Original Message -----
From: Don Beattie <g3ozf at btinternet.com>
To: <uk-contest at contesting.com>
Sent: Sunday, April 14, 2002 12:29 AM
Subject: [UK-CONTEST] CT HELP !


> Sorry to use reflector bandwidth for this problem, but I'm stumped.
>
> I've used CT for years, and after the change of QTH am getting the station
> back into "contest shape". I have been trying to load CT onto the computer
> here, and am having problems with the cluster link.
>
> Basically the whole programme works fine, except the receive text from the
> cluster is garbled. The TNC (a Tiny 2) seems to recognise outgoing
commands,
> as I can connect to the local cluster from CT, and I get part messages
back,
> but the rest is scrambled. I have the right COMTSR, with the right speed
and
> "E71". I have the right IRQ on the TSR. I am running the computer in basic
> DOS mode (although the problem is the same in Windows). CT version is
9.71,
> by the way. I've checked the TNC speed at 1200 Baud - it is working fine
> with Turbolog.
>
> Can someone remind me what I am doing wrong please ?  Any suggestions much
> appreciated.
>
> 73
>
> Don, G3BJ
>
> _______________________________________________
> UK-Contest mailing list
> UK-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/uk-contest