[UK-CONTEST] Kenpro Rotator

[Chris Tran]

Hi Adrian

I have a Kenpro KR-600RC here - it is an elderly but reasonable rotator for 
e.g. a small tribander (I use it for a 6ele 50MHz yagi) but the controllers 
are unreliable. I would not buy it unless you have done so already.  Both 
the KR-600 and the KR-400 can be turned by sufficient torque on the 
stub-mast. The KR-400 is a poor rotator, with cork discs as the totally 
useless 'brake' mechanism.

See   http://www.qsl.net/gm3woj/rotators.htm   for the circuit diagram and 
some notes about the KR-600RC.

73
Chris
GM3WOJ