[UK-CONTEST] VHF equipment
Andy Cook, G4PIQ
g4piq at btinternet.com
Thu Sep 7 13:24:37 EDT 2006
I centainly use an HF rig + transverter since I think that's the best route
to good dynamic range and good filtering. There's quite a lot to watch out
for - especially decent Tx noise performance. I use one of the old MuTek
transverters which have enough dynamic range to generally make the HF rig
the weak link and an FT1000MP which has about the best in class wide spaced
blocking performance which from my experience is the parameter which is most
critical (assuming everything else like phase noise, two tone dynamic range
etc is good enough) when you have monster local signals. The rig also have
excellent steep skirts on the filters and a second receiver for tuning the
band in the other ear.
Definitely a step up from the FT221/5 if only in phase noise (unmodified) &
filter performance.
Andy
-----Original Message-----
From: uk-contest-bounces at contesting.com
[mailto:uk-contest-bounces at contesting.com] On Behalf Of Ian White GM3SEK
Sent: 07 September 2006 08:54
To: uk-contest at contesting.com
Subject: Re: [UK-CONTEST] VHF equipment
Tim Kirby wrote:
>I have an old ft225rd with a mutek board. It used to be the, er, bees
>knees. The rig must be approaching 30 years old now and really isn't up
>to the job of serious contesting or dxing.
As the original breeder of that particular bee, I still have the old
FT221 (pre-225, pre-R even), and the very first front-end board from
which Chris Bartram developed the commercial product. The 221 has a
highly customised muTek board and many other improvements.
In its time, that rig was a real contest weapon... but I don't use it
now. The IC-746 that I presently use for 2m is not a particularly
high-class transceiver, and it has a far inferior front-end, but
everything else about it is vastly better than the old 221.
Above all, I would never go back to a mechanically tuned VFO. The
abilities of a synthesized VFO to communicate with a computer, build up
a bandmap and operate SO2V are all much more important to me now.
G4ZTR can probably be persuaded to talk about the virtues of using an
even better HF rig such as the FT-1k with a transverter.
One last point: don't ever buy a 221/225 from an old-time VHF DXer. All
the "tuning the band" that we used to do in the 221/225 years wore out
two ball drives in my rig, and finally wore out the gearbox bearings as
well. The result is about 500Hz of backlash that will make you really
appreciate a modern digital VFO! The rotary encoder switches for the
FT290 were also notorious for wearing out. There are no spares for these
vintage rigs any more, so if you must have one, buy it from an FMer.
--
73 from Ian GM3SEK
_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest
More information about the UK-Contest
mailing list