[UK-CONTEST] 80m and ADSL

[Graham Diacon]

Ian, that's interesting. What's the model number of the DLink router that
you're using?

Thanks,

Graham

-----Original Message-----
From: uk-contest-bounces at contesting.com
[mailto:uk-contest-bounces at contesting.com] On Behalf Of Ian J Maude
Sent: 11 January 2008 12:35
To: uk-Contest
Subject: Re: [UK-CONTEST] 80m and ADSL

Graham Diacon wrote:
> I have exactly the same problem here with my ADSL connection. I've tried
> ferrite cores (as opposed to clip ons) on all the cables into and out of
the
> router but without success. I've come to accept that as 3.5MHz is within
the
> ADSL bandwidth there's little that I can do. I'd be delighted if someone
> could prove me wrong.
>
> Graham
> G8EWT
>
> -----Original Message-----
> From: uk-contest-bounces at contesting.com
> [mailto:uk-contest-bounces at contesting.com] On Behalf Of John Lemay
> Sent: 11 January 2008 08:51
> To: uk-contest at contesting.com
> Subject: [UK-CONTEST] 80m and ADSL
>
> Morning all
>
> Maybe a little off topic, but I know there's a mine of information out
there
> !
>
> I might be giving our local (Colchester) club a bit of support in some of
> the 80m contests this year (AFS and CC). With just 100w to a Butternut I
> won't be exactly challenging the leaders, but it's the group effort which
> will benefit.
>
> Anyway, to get technical:- Whenever I run more than 20w or so on 80m, I
> notice that my ADSL connection is interrupted. As far as I can tell, the
> landline phone itself is not affected. I'm a bit concerned I may be having
a
> similar affect on my neighbours.
>
> I have simple "clip-on" ferrites on all leads but suspect that at
relatively
> low frequencies like 3.5MHz these might not be effective enough? The cable
> just passes through the ferrite; there are no multiple turns.
>
> I've noticed in addition that for other unknown reasons, I occasionally
lose
> my ADSL for a minute or two. I can't be watching the leds on the wireless
> router all the time, so I'm wondering if there's any bits of software I
can
> monitor my connection with over a long period? A "Google" has not been
> fruitful.
>   
I had this problem some time ago.  As you can imagine, it is a little 
difficult when the router drops and everyone loses their link to the 
cluster!
My own personal solution was to use a DLink router.  I have tried all 
the other major brands (apart from Cisco).  Most of them turn up their 
toes at the merest sniff of RF but the Dlink one seems fine, even at 
400W (for a contest over anyhow).

Ian

-- 

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?

_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest