[UK-CONTEST] FT1000MP HELP

[Mike Farmer]

Don

I had this problem with my MP about 5/6 years back did the CPU reset like
Callum suggests and it has been ok since.

Give it a try. But recommend you make some notes of any changes you have
made to the menus before you do it.


Mike
G3VAO


----- Original Message ----- 
From: "Callum m0mcx" <callum at mccormick.uk.com>
To: <uk-contest at contesting.com>
Sent: Thursday, January 22, 2009 9:45 PM
Subject: Re: [UK-CONTEST] FT1000MP HELP


> Don,
>
> Don't muck about, suggest a complete CPU reset - what do you think..?
>
> Switch on and hold SUB, 29 and ENT.
>
> Good plan..?
>
> Callum McCormick
> http://www.m0mcx.co.uk/
>
>
> -----Original Message-----
> From: uk-contest-bounces at contesting.com
> [mailto:uk-contest-bounces at contesting.com] On Behalf Of Don Beattie
> Sent: 22 January 2009 20:38
> To: Uk-Contest at Contesting.Com
> Subject: [UK-CONTEST] FT1000MP HELP
>
> A bit off topic, but I'm hoping someone will know the answer to this.
>
> One of my FT1000MPs (the original version) has suddenly started to tune
> itself. It is, in effect, permanently in scan mode. It pauses when it
comes
> across a signal, and the resumes. I've tried switching if off and on
again,
> and also have unplugged the mic, in case there was a wire lose in the
plug,
> initiating one of the scan lines. Nothing seems to stop it.
>
> I fear something sinister, but has anyone had this problem ?  Any
> suggestions welcome.
>
> 73
>
> Don, G3BJ
>
> _______________________________________________
> UK-Contest mailing list
> UK-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/uk-contest
>
>
>