[UK-CONTEST] [microHAM] microKEYER II - router - FT1000MP-WinTest - WinKey problems

[Paul Bigwood]

Hi Alan,

Each VFO can be in either VFO mode or MEMORY mode. When you select MEMORY 
Mode for a VFO and then tune away from the frequency the display shows MTUNE 
for Memory Tune.

The description is in the MEMORY section of the manual.

73

Paul G3WYW


----- Original Message ----- 
From: "Alan Jubb - 5B4AHJ" <g3pmr at shacklog.co.uk>
To: "UK Contest Reflector" <uk-contest at contesting.com>; "cdxc" 
<cdxc at yahoogroups.com>; <microham at yahoogroups.com>
Sent: Sunday, March 08, 2009 1:17 PM
Subject: Re: [UK-CONTEST] [microHAM] microKEYER II - router - 
FT1000MP-WinTest - WinKey problems


> Thanks to all who replied with helpful suggestions. I'm pleased to say 
> that
> the problem has now been resolved thanks to a tip from Andrew GI0NWG who 
> had
> seen a similar problem before.
>
> It turned out that the MP's main VFO was  in MTUNE mode, not VFO mode. How
> it got into that state I'm not sure! After using the VFO/MEM button to get
> to VFO mode, the problem was solved.
>
> I assume MTUNE means manual tuning, but I can't find any reference to it 
> in
> the manual, and I can't see how to get into that mode again. I had tried
> powering off the MP and powering on again, I'm suprised that that didn't
> reset it to VFO mode.
>
> It remains a mystery as to why SHACKLOG was working correctly and WinTest
> wasn't.
>
> 73
> Alan 5B4AHJ/P3J