[UK-CONTEST] Echoing DVK

[Nigel Newby]

Dear All, Many thanks for the replys. I have sent the mail here, as I know 
all those concerned will receive it.
The story so far. Justin G4TSH came round, and we done some mast 
maintainence. We also set up the digital voice keyer. This gave us the echo 
symptoms.
 We then went out and finished of the mast maintainance.
 When we went back into the shack to have another go at the echo problem. We 
found a new one.
 When starting to record your CQ. You find that there is rather a lot of 
noise. Just hit the shift and F1 key and lots of noise and crackling start 
up. We had not changed anything in the meantime.
I have since tried just about every combination of tick boxes but all have 
zero effect.
 Any ideas, or is it possible with all the crackling I am receiving, that 
either my rig or computer have caught Swine Flu
 All the best 73 Nigel G0VDZ.




> Have an interesting problem here.
> Using a Microham keyer (Mk1)and Win-test
> When using Win-test to record a CQ the recorded message seems to have an
> echo or reverb type effect on it. Normal transmitted audio is OK  I cannot
> find any settings in the sound card driver that would have this effect.
> Varying TX Power output makes no difference. It sounds like we are 
> operating
> from Canterbury Cathederal or a similar large echoing chamber!  Any 
> ideas???
>
> 73
> Nigel G0VDZ
> _______________________________________________
>