[UK-CONTEST] 6m Contest Contest Prog?

[Les Elliott]

Hi John

Paul’s file is for the M5 type contest. Uses uk locators as mults.

vhfrsgb.udc does not have a mult factor.
and it looks like vhfreg1  type contest will do ok as well.

You cannot change the port numbers in N1MM, (uses 1-8 only) 
but you can re-arrange them in Device Manager.



Mike,

<The UDC is for the postcode mults which isn't applicable here. >

VHFRSGB.udc does NOT use any class of multipliers, M1 to M5 do.



Quin,

<If you enter {sentrstcut} in the message field against the appropriate
function key, that will send what is in the "sent RST" field. >

thanks for finding that...I knew it was there somewhere.

Have fun guys
73
Les, G4OGB

From: John Muzyka 
Sent: Friday, June 22, 2012 5:06 PM
To: Les Elliott 
Subject: Re: [UK-CONTEST] 6m Contest Contest Prog?

Thanks Les, looks like the VHF-Paul4 will do it? I have downloaded that file into the N1MM directory but it does not appear in the list of contests unless its one of the few that are called VHf??? any idea? or which one will do the contest
Cheers
John

From: Les Elliott <g4ogb at tiscali.co.uk>
To: UK-contest <uk-contest at contesting.com> 
Sent: Friday, 22 June 2012, 15:44
Subject: Re: [UK-CONTEST] 6m Contest Contest Prog?


And there are User Defined Contest files available, see vhfrsgb.zip:

http://n1mm.hamdocs.com/tiki-list_file_gallery.php?galleryId=18&offset=50

vhfrsgb.udc

GL
Les

-----Original Message----- 
From: Roger Dixon
Sent: Friday, June 22, 2012 1:09 PM
To: uk-contest at contesting.com
Subject: Re: [UK-CONTEST] 6m Contest Contest Prog?

Hi John
I use N1MM for both HF and VHF contests with rig control to the K3 and CW
keying to the WinKey.

CU
Roger - G4BVY

-----Original Message-----
From: uk-contest-bounces at contesting.com
[mailto:uk-contest-bounces at contesting.com] On Behalf Of John Muzyka
Sent: 22 June 2012 12:34
To: uk-contest at contesting.com
Subject: [UK-CONTEST] 6m Contest Contest Prog?

Hi All,
I know this might not be the place to post this question but I am sure that
someone will be able to tell me.
I am going to have a bash in the 50mhz CW test on Sunday its only 3 hours,
down loaded SDV and set it up but could not get it to accept the TS590 (or
any rig for that matter) after an email to Paul EI5DI he replied that SDV is
no longer supported and it did not do rig control anyway,

What is there to use for this contest that will give me rig control and
keying the rig via Winkey?
Cheers
John G4RCG
_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2177 / Virus Database: 2437/5084 - Release Date: 06/21/12


_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest 

_______________________________________________
UK-Contest mailing list
UK-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/uk-contest