[VHFcontesting] RE: TE Systems amp accessory connector?

[Russ Pillsbury]

Jacob, there's always a way.  Sometimes I have made my own connector by
finding various pins in my junk box, and sticking them into the connector,
then gluing them all together.  Another way is to drill a small hole, put a
grommet in it, and run some wires out through it to a molex connector (the
kind you can buy at Radio Shack).

Of course finding the right connector would be great, but you may not wish
to wait...

73, Russ K2TXB


> -----Original Message-----
> From: owner-vhf at w6yx.stanford.edu [mailto:owner-vhf at w6yx.stanford.edu]On
> Behalf Of Jacob Tennant
> Sent: Saturday, August 31, 2002 9:14 PM
> To: rover at mailman.qth.net; vhfcontesting at contesting.com;
> vhf at w6yx.stanford.edu
> Subject: TE Systems amp accessory connector?
>
>
> Looking for the 8-pin connector for the accessory port on the TE Systems
> amps.
>
> I have the 0510G and need to hook it up for hard keying.
>
> Or if someone knows of a other type of connector that will fit into this
> port PLEASE let me know where to get one...
>
> J. Tennant  K8JWT
>
> ------
> Submissions:                    vhf at w6yx.stanford.edu
> Subscription/removal requests:  vhf-request at w6yx.stanford.edu
> Human list administrator:       vhf-approval at w6yx.stanford.edu
> List rules and information: http://www-w6yx.stanford.edu/vhf/
>