[VHFcontesting] Fwd: IC-2100H problem

[Christopher W. Allermann]

I has the problem on my 2100H.
Seems that when the DC line voltage drops below a certain point
the display will dim and will fail to release from transmit.

Chris - W2CWA


On Sat, 2003-07-12 at 09:13, AG2A wrote:
> >Has anyone had a problem with the Icom IC-2100h not releasing from 
> >transmit after letting go of the ptt button? I must power off and on or 
> >pull the mic out of the rig to go back into receive.  This started after a 
> >ride in the car (rig not used mobile) to the field day site, where I was 
> >going to use it for simplex contacts. It was working fine before the trip 
> >and I feel that some option was engaged with the bouncing during the 
> >ride... I tried a cpu reset but it was no help. Any ideas out there??
> >
> >                                         Tom - ag2a
> 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
> 
>