[VHFcontesting] SSB Sp-2000 Hookup HELP

[Tony Reynolds]

If it's like mine it's labeled TRX and ANT + SO-239 for power. The unit can 
be operated PTT or RF sensing up to 200watts. For RF sensing just apply 
power all the time and operate as normal. For PTT or sequence operation ( 
preferred) you need to sequence the power on and off. No power applied the 
internal relays by-pass the pre-amp. Power applied is receive mode with 
pre-amp in-line.

Tony


----- Original Message ----- 
From: "Dave Vondrasek" <n5ito at davidv.net>
To: <vhfcontesting at contesting.com>
Sent: Saturday, September 10, 2005 4:48 PM
Subject: [VHFcontesting] SSB Sp-2000 Hookup HELP


>I don't read German, The SP-2000 has a connection for TX / RX ( Type-N ) 
>and
> a UHF/SO-239 that is labeled 13.8V
> Can anyone give me a hint as to how to hook this up ?
>
> Dave
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>