[VHFcontesting] ts2000 and vhf2000 (Joe Barnes)

Bob Fischer bobw2sj at verizon.net
Sun Mar 4 18:12:02 EST 2007


Joe,

I have the same problem with a TS-2000X and so have others. So far Kenwood
has not admitted the problem as far as I know. The VHF/UHF bands all have
solid state keying with a current capacity of 20ma through the "External
Connector". The HF keying is a "control relay" through the "Remote"
connector.

I my case I use 28 MHz HF for a 222 transverter. When I key the 2000 on 50
MHz it also keys the 222 transverter through the HF "control relay"! When I
asked Kenwood about this they responded, "You must have something hooked up
wrong, we have not had any complaints about this before". If you figure this
out Joe, please let us all know...

Thanks,
Bob, W2SJ

-----Original Message-----
From: vhfcontesting-bounces at contesting.com
[mailto:vhfcontesting-bounces at contesting.com] On Behalf Of
vhfcontesting-request at contesting.com
Sent: Sunday, March 04, 2007 12:00 PM
To: vhfcontesting at contesting.com
Subject: VHFcontesting Digest, Vol 51, Issue 11

Send VHFcontesting mailing list submissions to
	vhfcontesting at contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.contesting.com/mailman/listinfo/vhfcontesting
or, via email, send a message with subject or body 'help' to
	vhfcontesting-request at contesting.com

You can reach the person managing the list at
	vhfcontesting-owner at contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of VHFcontesting digest..."


Today's Topics:

   1. ts2000 and vhf2000 (Joe Barnes)
   2. Re: ts2000 and vhf2000 (Roger N?VR)


----------------------------------------------------------------------

Message: 1
Date: Sat, 03 Mar 2007 19:00:31 -0500
From: Joe Barnes <n4jbk at bellsouth.net>
Subject: [VHFcontesting] ts2000 and vhf2000
To: vhfcontesting at contesting.com
Message-ID: <45EA0C1F.2030708 at bellsouth.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I am trying to use a kenwood ts2000 with a commander vhf2000 for 6 and a 
hf2500hp for hf. For some reason when I key the radio on 6 it keys the 
hf amp. Of course there are separate keying lines. Anyone have any ideas 
why? Thank you, Joe Barnes



------------------------------

Message: 2
Date: Sun, 4 Mar 2007 07:12:26 -0700
From: Roger N?VR <n0vr at comcast.net>
Subject: Re: [VHFcontesting] ts2000 and vhf2000
To: "'Joe Barnes'" <n4jbk at bellsouth.net>,
	<vhfcontesting at contesting.com>
Message-ID: <20070304141238.01D96319BDC at dayton.contesting.com>
Content-Type: text/plain;	charset="iso-8859-1"

Possible issues:
The pin assignments on the accessory plug are separate for each amp (and
then controlled by menu options). If the amp keying lines are wired to their
respective pins correctly, it may be a short between the HF line and the 6m
line.

-----Original Message-----
From: vhfcontesting-bounces at contesting.com
[mailto:vhfcontesting-bounces at contesting.com] On Behalf Of Joe Barnes
Sent: Saturday, March 03, 2007 5:01 PM
To: vhfcontesting at contesting.com
Subject: [VHFcontesting] ts2000 and vhf2000

I am trying to use a kenwood ts2000 with a commander vhf2000 for 6 and a 
hf2500hp for hf. For some reason when I key the radio on 6 it keys the 
hf amp. Of course there are separate keying lines. Anyone have any ideas 
why? Thank you, Joe Barnes

_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting



------------------------------

_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting


End of VHFcontesting Digest, Vol 51, Issue 11
*********************************************




More information about the VHFcontesting mailing list