[VHFcontesting] Not Going to Shelby - Items for Sale - Update

[N8UM]

For sale 1/2 inch hardline, Andrew FSJ4-50B - connectors installed , glued and booted by Andrew.  $30 each plus shipping  Note:  I use hardline for the rover on all bands above 222.  Right angle N or 7/16 DIN connectors are great for connecting to Bird directional coupler blocks and then jumpering to rig with a short length of LMR-400 or RG-214.

30 ft 7/16 DIN(M) to N(M) rt angle

29 ft N(M) to N(M) rt angle

26 ft N(M) to N(M) rt angle

25 ft 10 in N(M) to N(M)

M2 2M9 9 element 144 mhz beam, partially assembled, never used, $110

M2 2 port 144 power divider, new, $60

Phasing lines for M2 144 stack (2 lines) new from Directive Systems,
LMR-400 w/N's, $45

Klein Canvas bucket, $35

Alliance HD-73 Rotator, purchased rebuilt from Norm's Rotor Service, never used, $325

Tohtsu CX-530D 12V N to (2) TNC, like new, original owner - $65

Heil footswitch - $10

Heil Handswitch - $10

Heil short (6 in) boom base - $10

Heil 6 ft mike cable CC1-Y for Heil Pro mike to Yaesu (yellow) - $25

Heil ProSet Headset adapter for Kenwood AD1K (red) - $10

Heil ProSet Headset adapter for Yaesu AD1-Y (yellow) - $10

Note:  the following Bird items are original owner, no knockoff, no roll off table, Chinese, e-bay or clones.  All are like new condition

Bird UHF(F) QC adapter(s)  - $15 ea

Bird N(F) QC adapter(s) - $18 ea

Bird 50 W 50-T-FN dummy load w/N connector - $65

Bird 25C slug, 100-250mhz - $65

Bird 10A slug,  25-60mhz - $65

Bird 250C slug, 100-250mhz - $70

Coaxial Dynamics 130-150, 250mw - $65

Bird blank aluminum slug(s) - $10 ea

Coax 7/16 DIN Adapter(s) rt angle M-F - $25

Coax 7/16 DIN Adapter N(F) to DIN(M) -$35

Coax 7/16 DIN Adapter(s) N(M) to N(M) -$40

All items shown without shipping (FedEx Ground)


John B.  N8UM  Oak Ridge, Tennessee