[VHFcontesting] Rotor and Tower Section For Sale

[N8UM]

Emoto 105 TSX Rotator with spare new housing, unused bottom bracket and indoor controller. I am original owner. Handles 11 square feet of antenna. Same bolt pattern as HamM/Yaesu.  Used in my rover setup. See http://www.chuckmartin.com/VHFContest2003_3.htm   Rotator turns but no indication (pot in motor housing needs replacement). Indoor controller does not indicate (broken rubber band). Includes 452 universal coupling plate similar to W6NL torque plate that allows mast to rotate when it is not perfectly aligned vertical. Extra housing may contain good pot. I never opened since I did not want ball bearings all over floor. $150 and I will pay shipping CONUS.  Picture at http://www.eham.net/data/classifieds/images/323868.jpg  This is a 12Vdc motor, so you can hook up a battery and look out the window without the control box... :)

 

Rohn BX-3 tower section (8 ft.) with Bearing Plate on top drilled for TB-3 bearing and a rotor plate 6 ft down the section punched for Ham X/Yaesu/Emoto rotators. Excellent condition, no rust, stored indoors. Original owner. $100 plus shipping (should ship UPS).  I used this single section on a heavy duty tilt base with a 14 ft. aluminum mast for mountaintop portable operation.



Contact John B.  N8UM  Oak Ridge, Tennessee